Specifications

Open CTM (Revision D)

130

Command Reference

Examples:

cmd satbackup -100 30 -95 30 2 Set the bad RSSI threshold to -100dBm with a timeout of 30 seconds; set

the good RSSI threshold to -95dBm with a timeout of 30 second; trigger output 2.

cmd satbackup Queries the current satbackup configuration

A cmd save is required for this command to take effect.

return to list of commands

save

Save modem configuration to non-volatile memory.

Note: A single cmd save can be entered after a series of commands are configured, the entire session will

be saved.

If settings are not saved, they will remain in effect until the next powercycle

Example:

1. Save current configuration

cmd save

return to list of commands

showconfig

Returns the current configurations of the modem.

This is a read only command.

showconfig returns the configuration of the commands as they were entered, including the cmd

statement.

The output of showconfig is written to a script file /tmp/config.sh and to the console, both of which can

be used to configure the modem.

The below commands are not supported in showconfig. To query the status of the below commands use

showstate. To configure these commands the showconfig script file or input text must be manually

updated.

cmd odometer

cmd smstext