Specifications

Open CTM (Revision D)

122

Command Reference

2. Query the current configuration

cmd reportscripts

cmd reportscripts 0

return to list of commands

repremip n iii.iii.iii.iii

Sets the IP address of the remote server that the report will be sent to. Up to 999 reports may be

configured.

n = 1 to 999 report number

iii.iii.iii.iii = 0.0.0.0 to 255.255.255.255 remote IP address in decimal

The current IP address for a report can be queried by using the repremip n where n is the report number.

If n is omitted, all reports will be queried.

Examples:

1. Report #1 will be sent to remote IP address 123.10.1.101

cmd repremip 1 123.10.1.101

2. Query the remote IP address setting of all reports

cmd repremip

cmd repremip 1 123.10.1.101

cmd repremip 2 199.99.99.99

A cmd save is required for this command to take effect.

See also: repaddmes, repdelmes, repemail, replocport, repremport, repsms, reptype

return to list of commands

repremport n xxxxx

Sets the IP port number of the remote server that the report will be sent to.

n = 1 to 999 report number