Specifications

© 2010 Cypress Solutions Complete Manual: CTM-15X Firmware 1.3.0
Open CTM (Revision D)
118
Command Reference
repemail n <email address>
Sets the email address that the report will be sent to (if configured for email using reptype).
The default email address is blank.
Note that an email server is required – see emailsrv.
n = 1 to 999 report number
<email address> = name@domain email address to which the report will be sent
The current email address configured for all reports can be queried by using the repemail command
without parameters.
Examples:
1. Set the send to email address for report #1
cmd repemail 1 [e-mail]
OK
2. Query the email address for report #1
cmd repemail 1
cmd repemail 1 [e-mail]
OK
3. Query the email address for all reports
cmd repemail
cmd repemail 2 [e-mail]
OK
A cmd save is required for this command to take effect.
See also: repaddmes, repdelmes, replocport, repremip, repremport, repsms, reptype
return to list of commands
repfiledelivery n t rt username server-path port
where
n - report number (1-999)
t - file upload time period [s] (0-65535) 0=disable upload