Specifications
4
6.2 Rear Panel
1
2
3
4
HDMI IN HDMI OUT SERVICECONTROL RS-232IR IN DC 5V
1 65432 7
1
HDMI IN: Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending. The device obtain auto detection function
and will detect the last plug-in source for display on output when
it is unplugged, the device will detect rotationally from 1~4 input
source for display on output.
2
HDMI OUT: Connect to HDMI TV/display or HD Amplier for output
image and or audio display.
3
SERVICE: This slot is reserved for rmware update use only.
4
CONTROL: Connect from PC/Laptop with active internet service
for Telnet or WebGUI control with RJ-45 terminated cable.
5
RS232: Connect from PC/Laptop for RS-232 command sending to
control the device.
6
IR IN: Connect the IR Receiver included in the package for IR
signal receive from the included remote control.
7
DC 5V: Connect the adaptor with power cord included in the
package and connect to AC wall outlet for power supply.