Specifications

7
HDCPIN N1
Show Input N1 HDCP
Status
N1=1-4
HDCPIN N1 N2
Set Input N1 HDCP
On/Off*
N1=1-4 N2=0(OFF),
1(ON)
SOURCEDET Show All Input Signal NONE
SOURCEDET N1 Show Input N1 Signal N1=1-4
SINKINFO
Show All Output
Information
NONE
INNAME Show Input Name NONE
INNAME N1 N2 Set Input N1 Name N1=1-4
N2=ABCDEFGH(Max
Length=8)
OUTNAME Show Output Name NONE
OUTNAME A N1
Set HDMI Output
Name
N1=ABCDEFGH(Max
Length=8)
VER
Show Unit Firmware
Version
NONE
REBOOT System Reboot NONE
HELP (
?
) Show Command List NONE
HELP N
Show Descript Of
Command
N : COMMAND NAME
FADEFAULT
All Congure Set To
Factory Default
NONE
ETH_FADEFAULT
All Ethernet Congure
Set To Factory Default
NONE
Note: 1.All the RS-232 command will be not executed unless followed
with a carriage return. Commands are case-sensitive.
2. *HDCP ON/OFF equivalent to HDCP standard and Apple mode.
3. IP address's default setting is on statics with 192.168.5.88
4. To nd IP address in your zone an easy application is provided,
please download it from http://zh-tw.cypress.com.tw/uploadle/
CDPS_20140806_v2000.zip