Specifications

Video Mode Resolution Colors Channel Availability Comments
Digital DisplayPort up to 2560x1600 up to 30 bpp A, B AgatePXC/2, /1D up to 4 lanes, DP 1.1a
Analog Output
interlaced or non-interlaced
up to 1920x1200 up to 24 bpp A, B AgatePXC/2, /1V VGA, sync-on-green option
Analog Interlaced RS-170 (640x480) up to 24 bpp B AgatePXC/2, /1V Composite
PAL (768x575) up to 24 bpp B AgatePXC/2, /1V Composite or S-Video (Y/C)
NTSC (640x480) up to 24 bpp B AgatePXC/2, /1V Composite or S-Video (Y/C)
Analog HD up to 1080p up to 24 bpp A, B AgatePXC/2, /1V component YPbPr
Analog NonInterlaced up to 1920x1200 up to 24 bpp A AgatePXC/1R RG-101 compatible, one output
STANAG 3350 Class A-C up to 875 lines up to 24 bpp B AgatePXC/2 (contact Rastergraf for avail.)
Digital LVDS up to 2048x1536 18 or 24 bpp A, B AgatePXC/1L single or dual link
page 5
Table 2: AgatePXC Graphics Output Modes
Scale, Deflicker, Output
Timing & Position
Color Conversion
& Correction
Gamma
Correction
Display 1 Icon &
Cursor Image
Mix
Display 1
Source Graphic Image
Display 1
Source Overlay Image
Scale, Deflicker, Output
Timing & Position
Color Conversion
& Correction
Gamma
Correction
Display 2 Icon &
Cursor Image
Mix
Display 2
Source Graphic Image
Display 2
Source Overlay Image
30 bpp
30 bpp
30 bpp
30 bpp
DAC1
DAC2
LVDS / DPE or
LVDS / DPF
DVO
30 bpp
VGA
VGA
12-bit DDR, 24-bit
SDR, 24-bit DDR
Output Crossbar
dither
Dual-link DVI
30 bpp
30 bpp
30 bpp
30 bpp
30 bpp
dither
Single-link DVI, HDMI,
DisplayPort
Single-link DVI, HDMI ,
DisplayPort
Dual-link DVI
30 bpp
30 bpp
Single-link DVI, HDMI,
DisplayPort
Single-link DVI, HDMI,
DisplayPort
Single- or Dual-link
LVDS, DisplayPort
TMDSA/DPA
TMDSB/DPB
TMDSC/DPC
TMDSD/DPD
Figure 3: E4690 Graphics Output Section
GGrraapphhiiccss DDiissppllaayy CCaappaabbiilliittiieess
Table 2, below, provides the details about each possible
graphics output from the E4690.
Note that regardless of the number of graphics connec-
tions on the front and/or rear panels, the E4690 itself
allows only 2 channels to be active at one time.
Optional external in-line dongles can convert the Mini
DisplayPort output(s) to NTSC/PAL, DVI, VGA or LVDS. A
passive cable can convert the Mini DisplayPort to the larg-
er DisplayPort connector. Available cables and dongles are
listed on page 15.
Power drawn on each DP or VGA port should not exceed
50mA (500mA peak). If more power is required, please
use an external supply such as the Mouser 418-TR25D-
01.