Specifications

ManualsBrandsCypress ManualsTV Converter BoxCH-2D3D

Mini DisplayPort (mDP) to DisplayPort Cable:

1 x mDP plug to 1 x DP plug, 6 ft.: StarTech MDP2DPMM6

Mini DisplayPort (mDP) to VGA Active Adapter (Dongle):

1 x mDP plug to VGA output (receptacle), 1920 x 1200: StarTech MDP2VGA

Mini DisplayPort (mDP) to DVI Single Link Active Adapter (Dongle):

1 x mDP plug to DVI-D output (receptacle), 1920 x 1200: Startech MDP2DVIS

or HIS HMDPSDVIEYE

Mini DisplayPort (mDP) to NTSC/PAL Active Adapter (Dongle):

1 ea mDP plug and USB (for power) to Vktech/Lenkeng LKV386

1 ea RCA (composite) and DIN (S-Video) or ViewHD VHDMDP2AV (same)

1024x768 maximum display resolution output

LVDS Adapter Cable (uses SDR26 Mini Camera Link pinout):

1 x SDR26 plug to MDR26 receptacle, 0.5m cable Pureformance C20511A-0.5

Avnet WandCam OV5640 MIPI CSI-2 Camera:

Requires Cypress CX3 SDK software for XP/7/8 (free from Cypress),

Rastergraf MIPI boardlet, and Min DisplayPort Cable (mDP) is used for

convenience). Cable should not be more than 1 meter. OV5640 camera

supports up to 2592x1944@15fps. WandCam kit includes short FPC cable.

Go to http://www.em.avnet.com/en-us/design/drc/Pages/Wandcam.aspx AES-WCAM-ADPT-G

The Avnet picture shows both camera and controller but AES-WCAM-ADPT-G

part number really includes just the camera and FPC cable.

8-Bit YUV OV5640Y Camera:

For use with Agate YUV FPC connector OV5640 5PCS.

Go to http://www.aliexpress.com/item/Sale-OV5640-camera-module-120-degree-wide-angle-5-million-pixels-

5PCS/32215159543.html.

Note that this is for 5 cameras.

Accessories (tested but not sold by Rastergraf)

page

wwwwww..rraasstteerrggrraaff..ccoomm

Rastergraf, Inc.

1810-J SE First Street

Redmond, Oregon 97756

tel: +1 (510) 849-4801

email: sales@rastergraf.com

CCoonnttaacctt

UUss

DDiissccllaaiimmeerrss

aanndd

CCooppyyrriigghhttss

Specifications are subject to change without notice.

The information in this document is subject to change without notice and should not be construed as a commitment by Rastergraf. While reasonable precautions have

been taken, Rastergraf assumes no responsibility for any errors that may appear in this document.

All products shown or mentioned are trademarks or registered trademarks of their respective owners.

Trademarks and Logotypes are the property of their respective owners.

Simulator photo courtesy eNGENUITY Technologies, Inc.; waveform photo courtesy Celerity Systems/Aeroflex; x-ray baggage photo courtesy InVision Technologies, Inc.

051915