Specifications
page
12
Notes:
1. Sine vibration based on a sine sweep duration of 10 minutes per axis in each of three mutually perpendicular axes. May be displacement limited
from 15 to 44 Hz, depending on specific test equipment. Shock and Vibration values are by design and not tested in production.
2. Random vibration 60 minutes per axis, in each of three mutually perpendicular axes.
3. Three hits in each axis, both directions, 1/2 sine and saw tooth. Total 36 hits.
4. Standard air-flow is 8 cfm at sea level. Some higher-powered products may require additional airflow. Consult the factory for details.
5. Conformal coating type to be specified by customer. Consult the factory for details..
6. Temperature is measured at the card interior (not at edge) using on-board LM75 temperature monitor.
7. Last letter in ordering option: A for Acrylic Conformal Coating, S for Silicone Conformal Coating
Ruggedization
Rastergraf is not in the militarized business. The intent
of the following table is to illustrate how the Rastergraf
graphic boards fit into the standard ruggedized classes.
Rastergraf boards use standard distribution grade derat-
ed commercial temperature range or industrial tempera-
ture range components. No formal component tracking
is maintained.
Spec
Air-Cooled
Level 0
Air-Cooled
Level 50
Air-Cooled
Level 100
Air-Cooled
Level 200
Graphics
Board(s)
Agate
Topaz
Agate
Topaz
Agate
Topaz
Agate (TBD)
Topaz
Operating
Temperature (4, 6)
0°C to 50°C -20°C to 65°C -40°C to 71°C -40°C to 85°C
Storage
Temperature
-40°C to 85°C -40°C to 85°C -55°C to 125°C -55°C to 125°C
Humidity
Operating
0 to 95%
non-condensing
0 to 100%
non-condensing
0 to 100%
non-condensing
0 to 100%
non-condensing
Humidity
Storage
0 to 95%
condensing
0 to 100%
condensing
0 to 100%
condensing
0 to 100%
condensing
Vibration
Sine (1)
2 g peak
15-2 kHz
2 g peak
15-2 kHz
10 g peak
15-2 kHz
10 g peak
15-2 kHz
Vibration
Random (2)
0.01 g2/Hz
15-2 kHz
0.02 g2/Hz
15-2 kHz
0.04 g2/Hz
15-2 kHz
0.04 g2/Hz
15-2 kHz
Shock (3) 20 g peak 20 g peak 30 g peak 30 g peak
Conformal Coat (5) optional optional optional optional
Ordering Option (7) /CA or /CS /A5A or /A5S /A1A or /A1S /A2A or /A2S
Table 6: Ruggedization Levels