Datasheet

CY8C20xx6A/H CapSense Design Guide Doc. No. 001-65973 Rev. *A 15
3.1.1.1 Getting Started with CapSense User Modules
To create a new CY8C20xx6A/H project in PSoC Designer:
1. Select and place the CSD/CSA_EMC/SmartSense User Module.
2. Right click the user module to access the User Module Wizard.
3. Set button sensor count, slider configuration, pin assignments, and associations.
4. Set pins and global user module parameters.
5. Generate the application and switch to Application Editor.
6. Adapt sample code from the user module datasheet to implement buttons or sliders.
For a detailed step-by-step procedure for creating a PSoC Designer project and configuring the User Module Wizard,
refer to the datasheet of the specific user module.
3.1.2 Universal CapSense Controller Kit
The Universal CY3280-20xx6 CapSense Controller Kit features predefined control circuitry and plug-in hardware to
make prototyping and debugging easy. Programming and I
2
Figure 3-2. CY3280-20xx6 CapSense Controller Kit
C-to-USB Bridge hardware are including for tuning and
data acquisition.
3.1.3 Universal CapSense Controller Module Board
Cypress’s module boards feature a variety of sensors, LEDs, and interfaces to meet your application’s needs
 CY3280-BSM Simple Button Module
 CY3280-BMM Matrix Button Module
 CY3280-SLM Linear Slider Module
 CY3280-SRM Radial Slider Module
 CY3280-BBM Universal CapSense Prototyping Module