User`s guide

Quad Independent Channel
HOTLink II™ CYV15G0404DXB
Video PHY Demonstration Board
Page 29 of 92
7.0 Summary
The Cypress HOTLink II family of transceivers are compliant to requirements specified by SMPTE for SD-SDI and HD-SDI serial
interfaces. The evaluation platform provides a full-fledged reference design that enables customers to easily implement Serial
Digital Interface systems with HOTLink II Video PHYs.
8.0 References
1. Television—10-Bit 4:2:2 Component and 4fSC Composite Digital Signals–Serial Digital Interface, ANSI/SMPTE 259M–1997,
Society of Motion Picture and Television Engineers, 1997.
2. Television—Component Video Signal 4:2:2 - Bit-Parallel Digital Interface, ANSI/SMPTE 125M-1995, Society of Motion Picture
and Television Engineers, 1995.
3. Television—System M/NTSC Composite Video Signals–Bit-Parallel Digital Interface, ANSI/SMPTE 244M-1995, Society of
Motion Picture and Television Engineers, 1995.
4. Television—Bit-Parallel Digital Interface–Component Video Signal 4:2:2 16x9 Aspect Ratio, ANSI/SMPTE 267M-1995, Society
of Motion Picture and Television Engineers, 1995.
5. Pathological Conditions in Serial Digital Video Systems, SMPTE Engineering Guidelines, EG 34-1999, Society of Motion
Picture and Television Engineers, 1999.
6. Serial Digital Interface Checkfield for 10-Bit 4:2:2 Component and 4fsc Composite Digital Signals, SMPTE Recommended
Practices, RP 178-1996, Society of Motion Picture and Television Engineers, 1996.
7. SDI SMPTE Jitter Performance of the Independent Channel HOTLink II
 Transceiver, Application Note, Cypress Semicon-
ductor Corporation 2004.
Figure 6-13. GUI Setting for Sample Test 4: Step 13
[+] Feedback