Specifications

CALL 00800 443 88873 FOR TECHNICAL ADVICE
7
Reliability meets clarity
With the LUXEON Rebel designers are offered a broad
palette of colours and shades of white to work with.
The LUXEON Rebel White LED is available with CCTs
from 2,670K to 10,000K. These options are split into
three industry-optimised categories with typical CCTs
of 3,000K, 4,100K and 6,500K.
Philips Lumileds’ patented conformal coating ensures
low CCT variance over angle. Future Lighting Solutions
supports a comprehensive binning structure which is
detailed in the LUXEON Rebel datasheet.
High-power LEDs are the work-horses of solid-state lighting.
Much is asked of their reliability. So before designing in a
particular LED, you need to know your production run will
not be restricted by sub-standard testing. That is why we’ve
taken a closer look at what Philips Lumileds put the LUXEON
Rebel through before it crosses your production line.
To start with, every LUXEON Rebel is tested and
binned in-house. All colour dies are produced,
assembled, tested, binned, and quality controlled
by Philips Lumileds, ensuring that any particular
batch of LEDs maintains an equal standard.
The LUXEON Rebel in particular achieves
the lowest possible rating for moisture
sensitivity (JEDEC Level-1) meaning that
manufacturers benefit from indefinite shelf life,
with no dry pack, sealing, or baking to worry about.
LUXEON Rebel is compatible with JEDEC 020c, lead-free
reflow, and can handle up to three re-flow cycles for
complex assembly procedures or board reworks.
As well as offering high maximum stats, the LUXEON
Rebel is binned with guaranteed minimums for performance
so that designers can avoid nasty surprises. The way in
which Philips Lumileds produces lifetime and lumen
maintenance data also sets them apart. Unlike some
manufacturers, when Philips Lumileds claim a thousand
hours testing they literally mean a thousand hours - not a
hundred hours for ten products or one single gruelling hour
for a 1,000 products.
Projections of recorded data show that the LUXEON InGaN
products deliver, on average, 70% lumen maintenance at
50,000 hours of operation at a forward current of 700mA. This
projection is based on constant current operation with junction
temperature maintained at or below 135°C.
Unlike many LED manufacturers, Philips Lumileds publish
an application note that details their reliability data. To request
this email: [e-mail]
Does the LUXEON
Rebel
have a cause?
Defining the colours
The combination of thermal performance,
reduced dimensions and high light output means
that the LUXEON Rebel can genuinely open
up design opportunities, whilst the range
of binned colour temperatures makes
sure that design engineers can
fulfil their visual requirements.
The full range of
LUXEON Rebel
high-power
LEDs are
supported
by Future
Electronics.
Future Lighting
Solutions offers a
comprehensive support
structure for the LUXEON
Rebel range, as well as holding
a ready-to-ship inventory for all
the available colours.
For more information email:
[e-mail]
Bin
Warm
White
3000K
Neutral
White
4100K
Cool
White
6500K
Bin
Royal
Blue
455nm
Blue
470nm
Bin
Green
530nm
Cyan
505nm
Red
627nm
Red-
Orange
617nm
Amber
590nm
MINIMUM LUMENS AT SPECIFIED TEST CURRENT
G 40 40 40 A 175mW 8.2 E 23.5
H 50 50 50 B 225mW 10.7 F 30 30 30
J 60 C 275mW 13.9 G 40 40 40 40
K 70 70 D 18.1 H 50 50
L 80 80 E 23.5 J 60
K 70 70
L 80
TYPICAL LUMENS AT SPECIFIED OPERATING CURRENT
G 80 80 80 A 19 E 50
H 95 95 95 B 22 F 65 65 65
J 110 C 27 G 80 80 85 85
K 130 130 D 38 H 95 100
L 145 145 E 48 J
K 130
L 145
350mA700mA
33
1
2
1
2
TOP BOTTOM
Product Snapshot
Actual size
Did you know?
LUXEON Rebel won the ‘Technical
Excellence’ award at the 2007 Lightfair
International Tradeshow & Conference.
Email: [e-mail]
When responding to
this article please quote
the reply number
03
Dimensions:
3x4.5x2mm
Max junction temp:
150°C
Max drive current:
1000mA
Lumen maintenance:
70% @ 50k hrs @ 700mA (InGaN)
Range:
Selection of colour options;
AlInGaP and InGaN technologies