Specifications

CY8C24123A
CY8C24223A
CY8C24423A
Document Number: 38-12028 Rev. *V Page 45 of 71
AC Digital Block Specifications
The following tables list the guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75 V to
5.25 V and –40 °C  T
A
 85 °C, 3.0 V to 3.6 V and –40 °C  T
A
 85 °C, or 2.4 V to 3.0 V and –40 °C  T
A
 85 °C, respectively.
Typical parameters are measured at 5 V, 3.3 V, and 2.7 V at 25 °C and are for design guidance only.
Table 37. 5-V and 3.3-V AC Digital Block Specifications
Function Description Min Typ Max Unit Notes
All functions Block input clock frequency
V
DD
 4.75 V – – 50.4 MHz
V
DD
< 4.75 V – – 25.2 MHz
Timer Input clock frequency
No capture, V
DD
4.75 V – – 50.4 MHz
No capture, V
DD
< 4.75 V – – 25.2 MHz
With capture – – 25.2 MHz
Capture pulse width 50
[30]
––ns
Counter Input clock frequency
No enable input, V
DD
 4.75 V – – 50.4 MHz
No enable input, V
DD
< 4.75 V – – 25.2 MHz
With enable input – – 25.2 MHz
Enable input pulse width 50
[30]
––ns
Dead Band Kill pulse width
Asynchronous restart mode 20 – – ns
Synchronous restart mode 50
[30]
––ns
Disable mode 50
[30]
––ns
Input clock frequency
V
DD
 4.75 V – – 50.4 MHz
V
DD
< 4.75 V – – 25.2 MHz
CRCPRS
(PRS
Mode)
Input clock frequency
V
DD
 4.75 V – – 50.4 MHz
V
DD
< 4.75 V – – 25.2 MHz
CRCPRS
(CRC
Mode)
Input clock frequency – – 25.2 MHz
SPIM Input clock frequency – – 8.2 MHz The SPI serial clock (SCLK) frequency is equal to
the input clock frequency divided by 2.
SPIS Input clock (SCLK) frequency – – 4.1 MHz The input clock is the SPI SCLK in SPIS mode.
Width of SS_negated between
transmissions
50
[30]
––ns
Transmitter Input clock frequency The baud rate is equal to the input clock frequency
divided by 8.
V
DD
 4.75 V, 2 stop bits – – 50.4 MHz
V
DD
 4.75 V, 1 stop bit – – 25.2 MHz
V
DD
< 4.75 V – – 25.2 MHz
Receiver Input clock frequency The baud rate is equal to the input clock frequency
divided by 8.
V
DD
 4.75 V, 2 stop bits – – 50.4 MHz
V
DD
 4.75 V, 1 stop bit – – 25.2 MHz
V
DD
< 4.75 V – – 25.2 MHz
Note
30. 50 ns minimum input pulse width is based on the input synchronizers running at 24 MHz (42 ns nominal period).