Specifications

CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B 9
2. Getting Started
This chapter describes how to install and configure the CY3214-PSoCEVALUSB Kit.
2.1 Kit Installation
To install the kit software, follow these steps:
1. Insert the kit CD into the CD drive of your PC. The CD is designed to auto-run and the kit installer
startup screen appears.
Note You can also download the latest kit installer from http://www.cypress.com/go/CY3214-
PSoCEvalUSB. Three different types of installers are available for download.
a. CY3214-PSoCEVALUSB Kit ISO: This file (ISO image) is an archive file of the optical disc
provided with the kit. You can use this to create an installer CD or extract information using
WinRar or similar tools.
b. CY3214-PSoCEVALUSB Kit Setup: This executable file installs the contents of the kit CD,
which includes PSoC Programmer, PSoC Designer, kit code examples, kit hardware files, and
user documents.
c. CY3214-PSoCEVALUSB Kit Only (without prerequisites): This executable file installs only the
kit contents, which includes kit code examples, hardware files, and user documents.
2. Click Install the CY3214-PSoCEVALUSB to start the installation, as shown in Figure 2-1.
Figure 2-1. Kit Installer Startup Screen