Specifications

CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B 83
Code Examples
5.9.4 Verify Output
1. Program the board with Joystick.hex from <Install_Directory>:\Cypress\CY3214-
PSoCEVALUSB\<version>\Firmware\Joystick.
2. On successful programming, disconnect the MiniProg1 and connect the board to the PC.
3. When the joystick on the kit is moved vertically up, vertically down, horizontally left, horizontally
right, and also diagonally in all directions, observe the corresponding movement of the mouse
pointer on your monitor screen.
Figure 5-82. Message on LCD according to Joystick Movement