Specifications

72 CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B
Code Examples
Figure 5-67. Device Configuration of ISoc_Example
5.7.3 Driver Installation
Program the CY3214-PSoCEVALUSB board with the Bulk_ping.hex located at
<Install_Directory>:\Cypress\CY3214-PSoCEVALUSB\<version>\Firmware\
ISoc_Example\PSoC Project\isotest and connect the board to the PC using a USB cable.
When connecting the board for the first time, follow steps 1 to 5 in the section Driver Installation on
page 64.
At step 3, browse and locate ISoc.inf from <Install_Directory>:\Cypress\CY3214-PSo-
CEVALUSB\<version>\Firmware\ISoc_Example\Driver_Setup.
After successful driver installation, confirm in the following path: Start > right-click My Computer >
Manage > Device Manager > Universal Serial Bus Controller.
Figure 5-68. Device Management