Specifications

CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B 69
Code Examples
5.6.3 Driver Installation
Program the CY3214-PSoCEVALUSB board with the Bulk_ping.hex located at
<Install_Directory>:\Cypress\CY3214-PSoCEVALUSB\<version>\Firmware\
Bulk_PingExample\PSoC Project\bulk_ping and connect the board to the PC using a USB
cable. When connecting the board for the first time, follow steps 1 to 5 in the section Driver Installa-
tion on page 64.
At step 3, browse and locate BulkPing.inf from <Install_Directory>:\Cypress\CY3214-
PSoCEVALUSB\<version>\Firmware\Bulk_PingExample\Driver_Setup.
After successful driver installation, confirm in the following path: Start > right-click My Computer >
Manage > Device Manager > Universal Serial Bus Controller.
Figure 5-64. Device Management