Specifications

CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B 29
Hardware
4.2.11 USB Connector (P1)
The mini USB type B connector is compatible with USB 2.0 connector specifications. The RC filter is
used to isolate the VBUS from the on-board voltage domain.
Figure 4-14. USB Connector
4.2.12 Potentiometers (VR1 and VR2)
A potentiometer is a manually adjustable resistor. The potentiometer used here is of 10 KΩ variable
resistors.They are tied to Vss and Vcc (set drive to analog high-Z).
Figure 4-15. Potentiometers
Table 4-4. Pin Description
Pin No Pin Name Pin Description
1 OCDHC OCD high-speed clock output
2 GND Ground
3 XRES Reset signal (required only for Reset programming mode)
4 GND Ground
5 OCDCC OCD CPU clock output
6 OCDDO OCD odd data output
7 OCDDE OCD even data I/O.
8 VCC Supply voltage