Specifications

CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B 27
Hardware
4.2.7 ISSP Connector (J15)
This is used to program the device using the MiniProg device and the USB cable. To load a hex file
to the PSoC device chip, plug the MiniProg device to the jumper connector (J15).
Figure 4-10. ISSP Connector
4.2.8 Joystick (JS1)
A joystick is used to create a game. JSV (vertical pot value), JSH (horizontal pot value), and JSW
(switch) are accessible through the header on the board.
Figure 4-11. Joystick