Specifications

14 CY3214-PSoCEVALUSB Kit Guide, Doc No. 001-67030 Rev. *B
Getting Started
2.3 PSoC Programmer
To open the PSoC Programmer, click Start > All Programs > Cypress > PSoC Programmer <ver-
sion> > PSoC Programmer <version>.
To successfully program the device, follow these steps:
1. Use the Power button to power up the CY3214-PSoCEVALUSB kit before loading the hex file on
to the kit.
Figure 2-8. PSoC Programmer
2. Click the File Load button to load the respective hex file.
3. Click the Program button to program the hex file to the chip.
4. When programming is successful, Programming Succeeded appears in the Actions pane.
5. Close PSoC Programmer.
Note For more details on PSoC Programmer, go to:
<Install_Directory>:\Cypress\Programmer\<version>\Documents
2.4 SuiteUSB 3.4
The Cypress SuiteUSB 3.4 is a generic USB driver environment that you can freely use to develop
host applications that interact with a USB device.
CyConsole is used to communicate with USB devices that match the CyUSB.sys device driver. The
console supports hot-plugging of USB devices. When a device that matches the driver is plugged
into the PC, it automatically appears in the device list near the top of the CyConsole window.
SuiteUSB 3.4 software can be installed from the link http://www.cypress.com/?rID=34870.