Datasheet

56 Document No. 001-66271 Rev. *B CY8C21x34/B CapSense
®
Design Guide
9.4.2.3 Linear Slider Module Board
The CY3280-SLM Linear Slider Module consists of five CapSense buttons, one linear slider (with ten sensors), and
five LEDs. This module connects to any CY3280 Universal CapSense Controller Board.
9.4.2.4 Radial Slider Module Board
The CY3280-SRM Radial Slider Module consists of four CapSense buttons, one radial slider (with ten sensors), and
four LEDs. This module connects to any CY3280 Universal CapSense Controller Board.
9.4.2.5 Universal CapSense Prototyping Module
The CY3280-BBM Universal CapSense Prototyping Module provides access to every signal routed to the 44-pin
connector on the attached controller boards. The Prototyping Module board is used in conjunction with a Universal
CapSense Controller board to implement additional functionality that is not part of the other single-purpose Universal
CapSense Module boards.
9.4.3 In-Circuit Emulation (ICE) Kit
The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator and the target PSoC device in
a prototype system by way of a flex cable or PCB through package-specific pod feet. The following pod is available:
 CY3250-21X34QFN In-Circuit Emulation (ICE) Pod Kit for Debugging QFN CY8C21x34 PSoC Devices
9.5 PSoC Programmer
PSoC Programmer is a flexible, integrated programming application for programming PSoC devices.
PSoC Programmer can be used with PSoC Designer and PSoC Creator to program any design onto a PSoC device.
PSoC Programmer provides a hardware layer with APIs to design specific applications that use the programmers and
bridge devices. The PSoC Programmer hardware layer is fully detailed in the COM guide documentation as well as
the example code across the following languages: C#, C, Perl, and Python.
9.6 MultiChart
MultiChart is a simple PC tool for real-time CapSense data viewing and logging. The application allows you to view
data from up to 48 sensors, save and print charts, and save data for later analysis in a spreadsheet.
9.7 PSoC Designer
Cypress offers an exclusive Integrated Design Environment, PSoC Designer. With PSoC Designer, you can configure
analog and digital blocks, develop firmware, and tune your design. Applications are developed in a drag-and-drop
design environment using a library of precharacterized analog and digital functions, including CapSense.
PSoC Designer comes with a built-in C compiler and an embedded programmer. A pro compiler is available for
complex designs.
9.8 Code Examples
Cypress offers a large collection of code examples to get your design up and running fast.
 Power Consumption With CapSense (CSD) on CY8C21x34 Device - EP65489
 CSD Software Filters with EzI2Cs Slave on CY8C21x34
 Interfacing PSoC to an SPI EEPROM
 CSD with EzI2Cs Slave on CY8C21x34
 Pseudo Random Sequence Generator
 CSD with TX8 on CY8C21x34
 CSD with I2CHW Slave on CY8C21x34