Specifications

Getting Started with FX2LP™
www.cypress.com Document No. 001-65209 Rev. *B 10
S.No Firmware Example Description
9 LEDCycle Simple firmware example to demonstrate use of the general purpose indicator LEDs (D2, D3, D4, D5) on the
Development Kit board.
10 Pingnak Contains firmware to perform bulk loopback of EP2OUT to EP6IN and EP4OUT to EP8IN using the PING NAK
interrupt to initiate the transfer.
11 iMemtest Memory test firmware example. Tests on-chip RAM.
12 vend_ax Contains the source files to build a vendor specific command sample. This example demonstrates how to
implement different vendor commands.
The framework uses the EZ-USB library (EZUSB.LIB).
The EZ-USB library is an 8051 .LIB file that implements
functions that are common to many firmware projects.
These functions need not be modified and are therefore
provided in library form. However, the kit includes the
source code for the library in the event that you need to
modify a function or if you just want to know how
something is done. Detailed information about the EZ-USB
library (section 5.4) and firmware framework (chapter 5) is
available in the ‘CY3684 DVK Kit_Guide’. This library is
included in DVK under the ‘Target\Lib\LP’ folder.
Steps to Bind cyusb.sys to the Connected FX2LP DVK
EZ-USB FX2LP DVK with default jumper settings is shown in Figure 6.
Figure 6. FX2LP DVK with Default Jumper Settings