User`s manual

bits. The modification does not affect the operation of the 511 with
other GTEK programmers. You can use a 514 (any revision)
adapter in place of a 511 adapter.
12–Use Model 755 adapter with this part and selection. Uses Standard
algorithm only.
13–These parts are programmed using a 705 programmer. Program
a 2732, 2732A, 2732B or on special models a 2764 or 2764A with
program code, then put into program eprom socket of Model 705.
14–Use the Model 346 adapter to program this 8 pin serial EEprom.
15–These parts may REQUIRE the Adaptive algorithm. TI started
producing chips using a fast algorithm without changing their part
numbers. You may not be able to determine which algorithm to
use with these parts. To be safe, always use the Adaptive algorithm
with these parts. Programming with the dumb algorithm might
damage the part.
—Notes—
Model 9000 Appendix B
Page 79