Specifications

Chapter 2: Board Components 2–11
MAX II CPLD EPM2210 System Controller
August 2012 Altera Corporation 100G Development Kit, Stratix V GX Edition
Reference Manual
MAX II CPLD EPM2210 System Controller
The board utilizes the EPM2210 System Controller, an Altera MAX II CPLD, for the
following purposes:
■ FPGA configuration from flash memory
■ Power consumption monitoring
■ Temperature monitoring
■ Virtual JTAG interface for PC-based power and temperature GUI
■ Control registers for clocks
■ Control registers for Remote System Update
■ Control registers for general purpose I/O and PFL
■ Register with CPLD design revision and board information (read-only)
LCD_WEN 2.5-V LVCMOS output 1 LCD write enable
Ethernet
ENET_TXD[3:0] 2.5-V LVCMOS output 4 Ethernet transmit RGMII data bus
ENET_TX_EN 2.5-V LVCMOS output 1 Ethernet transmit enable
ENET_GTX_CLK 2.5-V LVCMOS output 1 Ethernet transmit clock
ENET_RXD[3:0] 2.5-V LVCMOS input 4 Ethernet receive RGMII data bus
ENET_RX_DV 2.5-V LVCMOS input 1 Ethernet receive data valid
ENET_RX_CLK 2.5-V LVCMOS input 1 Ethernet receive clock
ENET_INTN 2.5-V LVCMOS input 1 Ethernet management bus interrupt
ENET_MDC 2.5-V LVCMOS output 1 Ethernet RGMII clock
ENET_MDIO 2.5-V LVCMOS bidirectional 1 Ethernet RGMII data
ENET_RESETN 2.5-V LVCMOS output 1 Ethernet reset
Total I/O:
1020
Table 2–4. Stratix V GX I/O Usage Summary (Part 6 of 6)
Function I/O Type I/O Count Description