User guide
48
ASIC Prototyping Board Solutions
Stratix IV ASIC Prototyping Board
EK4SEH40
Galaxy Far East Corp.
Altera Stratix IV-E FBGA1517 FPGA Prototyping
Module
The module use Altera Stratix IV-E family FPGA
with FBGA (Fine Line Ball Array) 1517 pin package
device . Each extended I/O signal through protection
buffer, provide 5V tolerance feature.
Features
• Altera Stratix IV Family FineLine BGA 1517 pin
Package Device(EP4SE530 to P4SE820) up to
813,050 LEs, 23,130K RAM Bits, 960 18X18
Multipliers & 12 PLLs
• Altera Serial Configuration Device EPCS128
• 2 UART Serial Communication Port
• Oscillator Socket
• Provide 757 In/Out Pin (With I/O Protection buffer)
• 1 Mictor Connector
• Power System For Altera device (1.1V/3.0V/2.5V)
• 8 Separate I/O Bank
• Heat Sink Fan
• JTAG Port Connector
• AS Port Connector
• Battery for Stratix IV Security System
• Accessories
AC-Adapter x 1 piece（Power Adaptor of AC
110V/220V to DC 12V/5A）
GFEC USB Download Cable x 1
Altera Stratix IV-E FBGA1517 FPGA Prototyping
Module
The module use Altera Stratix IV-E family FPGA
with FBGA (Fine Line Ball Array) 1517 pin package
device . Each extended I/O signal through protection
buffer, provide 5V tolerance feature.
Features
• Altera Stratix IV Family FineLine BGA 1517 pin
Package Device(EP4SE530 to P4SE820) up to
813,050 LEs, 23,130K RAM Bits, 960 18X18
Multipliers & 12 PLLs
• Altera Serial Configuration Device EPCS128
2 UART Serial Communication Port
Board Solutions from Third Party Board Partners
ALL-IN-ONE Base Board B-11
(Stratix III Edition)
StarFire-2D820/530/340 Cyclone III SOPC board
Accverinos Co.,Ltd.
Beijing HyperSilicon Co., LTD
Hangzhou Free Electron Co. Ltd
Features
• EP3SL340F1517 or EP3SL200F1517 (-2 or -3)
• DDR2 DIMM
• DVI I/O Support: 1 each of input and output port
using TI TFP403 & 410 chips. Max 165MHz
• 1 x Gigabit Ethernet PHY & RJ45 Connector.
• 1 x USB2.0 Connector, Cypress EZ-USB and ULPI
supporting PHY - Can use either of USB MCU or
PHY
• 8 pairs each of input and output signals through
C44LVDS connectors. Tested 1.2Gbps/pair
operation
• SD Card support (connected directly to FPGA and
controlled by MegaCore IP)
• 1 x Altera standard HSMC connector
• 5 x Samtec 120-pin connectors
Features
• Two Altera Stratix IV (EP4SE820 / EP4SE530 /
EP3SL340F1760) FPGAs with capacity of 13.6
Million ASIC gates
• 760 connections between two FPGAs, with support
for the AXI / APB / AHB bus standards.
• Stackable for two or more StarFire-2D820/530/340
• Optional SODIMM memory expansion slot,
covering SDRAM, DDR, Mobile DDR, DDRII
memory, with clock frequency up to 400MHz.
• 480 user IOs
• 4 crystal sockets to provide clock input
• 4 SMA coaxial high speed I/Os
• A number of high-end power modules guarantee
the power for the entire mother board and the
extension of daughter boards as well
This board offer Ethernet, DDR2 interface, enough
test port and expend IO. It is suitable for SOPC
system design and small/middle density IP/ASIC
verification.
Features
• Cyclone III EP3C80F780C8N or
EP3C120F780C8N
• 256M DDR2 SO-DIMM (up to 2G)
• 12 layer PCB
• 216 expand IO/CLK/PLLOUT (include 9 LVDS in,
LVDS out)
• Marvel 10M/100M/1000M Ethernet PHY
• SMA clock/data input/output
• 32M FLASH
• 4 x LED, one reset