User guide

32
Back / Front
Back / Front
Altera Stratix IV GX/GT PCI
Express Gen 2 / USB 3.0 / SFP+
Development Platform
HTG-FMC-CX4-SATA-SMA HTG-FMC-2CX4
HiTech Global, LLC
HiTech Global, LLC
HiTech Global, LLC
Features
• Altera Stratix 4GX EP4SGX230, 290, 360, 530, and
4GT EP4S100G2
• x8 PCI Express Gen 2 end-point (40 Gbps)
• DDR3 SO-DIMM (up to 4 GB)
• 256 MB DDR2
• x2 SFP+ with Netlogic AEL2006 dual Physical
layer retimer with an integrated Electronic
Dispersion Compensation (EDC) engine
• x2 Gigabit Ethernet
• USB 3.0 / 2.0 Host (5.0 Gbps) & Device (5.0 Gbps)
• x16 SMA (for 4 Serial Transceiver Ports) with
external clock interface (connected to 10Gig
transceivers with the GT model).
• High-speed Expansion Connector with 8
data-rate-adjustable Serial Transceivers and LVDS
signals
• x8 rate-adjustable Serial Transceivers (SerDes)
FMC daughter card with one CX4, two SATA, and two
SMA ports
Features
• CX4 Connector (x1)
• SATA (x2)
• SMA (x8 for two Serial Transceivers)
• Frequency Synthesizer (x2)
• Clock Buffer (x2)
• EEPROM
• FMC Connector
FMC daughter card with two CX4 connectors
providing access to two 10Gig ports
Features
• CX4 Connector (x2)- Provides access to total of 8
Serial Transceivers
• Frequency Synthesizer (x2)
• Clock Buffe
• EEPROM
• FMC Connector
Back / Front
HTG-FMC-SFP-PLUS
HTG-FMC-X8SMA
HTG-PCIE-TEST
HiTech Global, LLC
HiTech Global, LLC
HiTech Global, LLC
FMC daughter card with two SFP+ connectors, two
10Gbps physical layer transceivers which provide full
PCS, PMA, and XGXS sub-layer functionality
Features
• SFP+ Connector (x2)
• EEPROM
• FMC Connector
• On-board clock
FMC daughter card with 32 SMA connectors for 8
serial transceiver ports, two SMA connectors for
external clock, and on-board super clocks
Features
• x32 SMA FMC Module- Provides access to total of 8
Serial Transceiver Ports
• Frequency Synthesizer and 3 different oscillators
sources
• SMA connectors for external differential clocks
• Clock Buffer
• EEPROM
• FMC Connector
This module can be used for:
• PCI Express Test - Provides incoming clocks
ranging from 100MHz to 250MHz and power (12V
and 3.3V) for quick electrical verification of any
PCI Express card (Gen1 and 2).
• PCI Express Loopback Test - PHY or Serial
Transceivers used as PHY can be tested for
functionality and performance
• Serial Transceiver Expansion - Serial Transceivers
used as PCIe PHY can be used for other serial
interfaces through SMA cables
Features
• x8 PCI Express Gen1 and Gen2 Female Connector
• Super clock generating 100MHz, 250MHz and
other related frequencies
• External Clock Outputs
• Breakout SMA Connectors for Tx and Rx lanes