User guide

Board Solutions from Third Party Board Partners
ALL-IN-ONE Base Board B-11
(Stratix III Edition)
CycloneIII SOPC board
Accverinos Co.,Ltd.
Hangzhou Free Electron Co. Ltd
Features
• EP3SL340F1517 or EP3SL200F1517 (-2 or -3)
• DDR2 DIMM
• DVI I/O Support: 1 each of input and output port
using TI TFP403 & 410 chips. Guaranteed to
operate at 165MHz
• 1 x Gigabit Ethernet PHY & RJ45 Connector.
• 1 x USB2.0 Connector, Cypress EZ-USB and ULPI
supporting PHY - Can use either of USB MCU or
PHY
• 8 pairs each of input and output signals through
C44LVDS connectors. Tested 1.2Gbps/pair
operation
• SD Card support (connected directly to FPGA and
controlled by MegaCore IP)
• 1 x Altera standard HSMC connector
• 5 x Samtec 120-pin connectors
This board offer Ethernet, DDR2 interface, enough
test port and expend IO. It is suitable for SOPC
system design and small/middle density IP/ASIC
verification.
Features
• Cyclone III EP3C80F780C8N or
EP3C120F780C8N
• 256MB DDR2 SO-DIMM (up to 2GB)
• 12 layer PCB
• 216 expand IO/CLK/PLLOUT (include 9 lvds
in,lvds out)
• Marvel 10M/100M/1000MEathernet PHY
• SMA clock/data input/output
• 32M FLASH
• 4 LED, one reset