User guide

17
Quad Link LVDS Interface HSMC
Board
Gigabit Ethernet PHY / HDMI
Transmitter HSMC Board
DVI Receiver / Transmitter HSMC
Board
Microtronix Datacom Ltd.
Microtronix Datacom Ltd.
Microtronix Datacom Ltd.
The Quad Link LVDS Interface HSMC
Daughtercard supports receive and transmit LVDS
links each consisting of 5 data channels and 1 clock
for a total of 48 LVDS channels. The standard
configuration of 20 Tx + 4 clk and 20 Rx + 2 clk, is
capable of supporting LCD display panels up to 1080p
at 100/120Hz. On-board LVDS termination resistors
can be removed to convert receiver channels into
transmitters as required to support 12 or 14-bit color
applications.
Features
• Optimized for video applications
• Single core provides both LVDS transmitter and
receiver functions
• Support for both 28-bit and 35-bit parallel data
• Supports 1, 2 and 4 link configurations
No transmit PLL clock fine tuning required
The Microtronix Gigabit Ethernet PHY and HDMI
Transmitter HSMC Daughtercard adds functionality
to the ViClaro III, the Altera EP3C120 Development
Kit or other third party FPGA development boards
with a HSMC header.
Features
• The Marvell 88E1111 Gigabit Ethernet PHY is
fully compatible with Altera's Triple Speed
Ethernet MAC IP.
• Deep Color 12-bit Deep Color HMDI 1.3
Transmitter using the Analog Devices ADV7510
video chip.
• HSMC compatible daughter card
The Microtronix DVI Receiver / Transmitter HSMC
Board is designed to allow developers access to
high-quality, high resolution video signals in their
FPGA designs. It integrates both a DVI receiver and
transmitter onto the same card giving the flexibility
required by high resolution image processing systems.
Card is shipped with source code examples.
Features
• Digital Visual Interface Compliant (DVI 1.1)
• Supports resolutions from VGA to UXGA
(1600x1200 and 1920x1080 [1080p@60])
• 25 - 165 Mhz Pixel rates
• EDID data reading/writing
• Monitor detection through Hot-Plug
• 15Mbps Optical S-PDIF TX and RX for digital
audio connectivity
HDMI Rx/Tx HSMC Board Lancelot VGA Controller IP Design
Kit
High Speed AD/DA FPGA Board
Microtronix Datacom Ltd.
Microtronix Datacom Ltd.
SIGLEAD, Inc.
The Microtronix HDMI Receiver / Transmitter HSMC
Daughtercardinterfaces a HDMI receiver and
transmitter to your Altera FPGA development kit
using the HSMC expansion connector. The receiver
also supports an analog component video (YCbCr)
interface.
Features
• Uses the Analog Device AD9889 HDMI
Transmitter and AD9880B HDMI Receiver
• Analog YCrCb Video Receiver
• Supports 480i / 720p / 1080i / 1080p @ 50/60 Hz
• EDID data reading / writing
• Auto detection of monitor through Hot-Plug
• Altera compatible HSMC expansion connector
Microtronix is proud to offer the innovative Lancelot
VGA IP Design Kit solution for customers wanting to
develop video IP based solutions. The Lancelot Kit
comes complete with an IP core written in VHDL that
can be synthesized for all Altera FPGA devices.
Features
• Display resolutions: 640 x 480, 800 x 600, 1024 x
768
• Displays up to 24-bit color
• 900 LE's
• Video & audio development board
• VGA IP Core reference design & demo
• Compatible with Microtronix Multi-port SDRAM
IP Core
Features
• Stratix III & IV 1152 pin devices
• AD/DA Converter SMA Connector differential
input/output
• ADC: 12 bit 550MSPS dual channel
• DAC: 16 bit 1GSPS dual channel
• 27.000MHz oscillator
• MCX input
• On-board PLL
• CMX differential (single end) output dual channel
• DDR2 SDRAM 240pin DIMM (Max 4GBytes)
• DVI Input/Output Max. UXGA (165MHz)
• Gigabit Ethernet controller (PCI bus)
• USB2.0 A Connector x2 & mini AB connector x1
• LVDS Connector input/output 10 pairs each Max
10Gbps
• USB Serial I/F
•
Expansion port 80pin connector (40 user pins)