User`s manual

Applets
Finder
The Finder is designed to help correlate board target numbers
against PCI slot numbers in systems employing multiple
boards.
Target Number
Select the Target number of the board you wish to identify
using the Target Number combo box.
Blink
Click the Blink button to blink the LED on the board for the
specified target. It will continue blinking until you click
Stop.
On/OFF
Use the On and Off buttons to activate or deactivate
(respectively) the LED on the baseboard for the specified
target. When you exit the application, the board’s LED will
remain in the state programmed by this applet.
X5-GSPS User's Manual 74