User`s manual

Applets
Logic Update Utility (VsProm.exe)
The Logic Update Utility applet is designed to allow field-
upgrades of the logic firmware on the 210M module. The
utility permits an embedded firmware logic update file to
reprogrammed into the baseboard Flash ROM, which stores
the "personality" of the board.
Note that this utility should only be used after firmware
development and debugging has been completed. During the
development cycle, it is much more efficient to download
and debug firmware using the Xilinx Bit-Blaster JTAG cable.
To use the applet, select the instance of the 400M module to
be updated. This will be target zero in single-target
installations.
Then, click the browse button (...) to select the logic bit file
image containing the updated firmware image. Typically,
this is located in the Innovative\X5-
210M\Hardware\Images folder on your default drive.
Finally, click the Write button to program the firmware into
the on-board FLASH rom. Programming typically takes
about five minutes. After rebooting the PC, the new
firmware will take effect.
X5-GSPS User's Manual 73