Specifications

CY7C65620
CY7C65630
Document Number: 38-08037 Rev. AB Page 23 of 32
Absolute Maximum Ratings
Exceeding maximum ratings may impair the useful life of the
device. These user guidelines are not tested.
Storage temperature ............................... –65 °C to +150 °C
Ambient temperature with power applied:
Commercial .................................................. 0 °C to +70 °C
Automotive ................................................ –40 °C to +85 °C
Industrial .................................................... –40 °C to +85 °C
Supply voltage to ground potential ..............–0.5 V to +4.0 V
DC voltage applied to outputs
in high Z state ..................................... –0.5 V to V
CC
+ 0.5 V
Power dissipation (4 HS ports) .................................... 0.9 W
Static discharge voltage ..........................................> 2000 V
Maximum output sink current per I/O ......................... 10 mA
Reset period
(the minimum period between
when V
CC
reaches the minimum operating voltage
and de-assertion of the reset line) ..............................1.9 ms
Operating Conditions
T
A
(ambient temperature under bias)
Commercial .................................................. 0 °C to +70 °C
Automotive ................................................ –40 °C to +85 °C
Industrial ................................................... –40 °C to +85 °C
Supply voltage ........................................ +3.15 V to +3.45 V
Ground voltage ............................................................... 0 V
FOSC (oscillator or crystal frequency)
parallel resonant,
12 pF load capacitance, 0.5 mW ................24 MHz ± 0.05%
Electrical Characteristics
USB Transceiver
USB 2.0 certified in full-, low-, and high-speed modes.
DC Electrical Characteristics
Parameter Description Conditions Min Typ Max Unit
V
CC
Supply voltage 3.15 3.3 3.45 V
V
CC
RampUp Ramp rate on V
CC
––18V/ms
V
IH
Input high voltage 2 – 5.25 V
V
IL
Input low voltage –0.5 – 0.8 V
I
l
Input leakage current 0 < V
IN
< V
CC
––±10A
V
OH
Output voltage high I
OUT
= 4 mA 2.4 – – V
V
OL
Output low voltage I
OUT
= –4 mA – – 0.4 V
I
OH
Output current high – – 4 mA
I
OL
Output current low – – 4 mA
C
IN
Input pin capacitance – – 10 pF
I
SUSP
Suspend current – 80 – A
I
CC
Supply current
4 active ports
Full speed host, full-speed devices – 86 110 mA
High speed host, high-speed devices – 231 260 mA
High speed host, full-speed devices – 154 180 mA
2 active ports
Full speed host, full-speed devices – 77 100 mA
High speed host, high-speed devices – 163 190 mA
High speed host, full-speed devices – 136 160 mA
No active ports
Full speed host – 65 90 mA
High speed host – 93 120 mA