User guide

Memory, Micros, Embedded Computing & Peripherals
ORDERLINE
65 6865 3433
28
Many more leading brands from over 2,500 suppliers available online
429-252 UC232R-10 Economy USB-RS232 Converter cable, 0.1m 1+ S$ 32·40
429-274 US232R-10 Premium USB-RS232 Converter cable, 0.1m 1+ S$ 39·70
687-7806 US232R-100-BLK Premium USB-RS232 Converter cable, 1m 1+ S$ 38·20
687-7792 US232R-10-BST Premium USB-RS232 Conv cable +CD, 0.1m 1+ S$ 32·90
687-7796 US232R-100-BST Premium USB-RS232 Conv cable +CD, 1m 1+ S$ 48·30
FTDI’s range USB to RS-232 evaluation cable which can be used for testing the functionality of the FT232R device and drivers prior to
design-in.
The UC232R-10 is capable of communication rates with RS-232 devices from 300 Baud up to 230k Baud. A 10cm USB cable is fitted.
The US232R-10, US232R-100, are FTDI’s premium version USB to RS-232 evaluation cables. The electronics, including the FT232RQ chip
are housed in a glossy white enclosure with blue, side-lit LED Tx and Rx traffic indicators. A matching white 10cm (for US232R-10), or
1m (for US232R-100), or 5m (for US232R-500) USB cable uses gold plated USB and DB9 connectors. Complete with Microsoft WHQL
certified VCP drivers for Windows XP, Apple Mac, and Linux. Using an enhanced RS-232 level converter, these USB to RS-232
evaluation cables are capable of communication rates from 300 Baud to 1M Baud.
The converter cables are a family of USB to RS-232 or RS-422 or RS-485 levels serial UART converter cables incorporating FTDI’s
FT232RQ which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a serial
UART interface to USB.
Each converter cable includes the FT232R, which is encapsulated into the USB connector end of the cable. RS-232 or RS-422 or RS-485
level shifter plus Tx and Rx functionality.
LEDs give a visual indication of traffic on the cable. The other end of the cable is bare, tinned wire ended connections. Optional power
supply output on the Red wire is either zero or 5 Volts.
Entire USB signalling and protocol handled by the FT232RQ
device on the PCB
PCB is USB Powered - no external supply required
UART interface full support
Support for FT232R FTDIChip-ID
ᓽ feature for improved security
Data transfer rates from 300 baud to 3 Mbaud
Internal EEPROM with user-writeable area
Uses an FT232RQ device which is housed inside the USB ’A’
connector. Featuring I/O pins configured to operate at 5V or
3.3V TTL levels. Cables are 1.8m (6 ft) long and available in
several termination options including SIL6 0.1in pitch
connector, 3.5mm audio jack plug, 8-way 2mm keyed
connector or wire-ended.
These converter PCBs use an FT232RQ device housed
inside the USB ’A’ connector. The PCB provides access to
the Transmit (Tx), Receive (Rx), RATS#, and CTS# , VCC
(5V) and GND. The TTL-232R-3V3-PCB version has I/O pins
configured to operate at 3.3V levels.
687-7825 USB to RS-232 converter PCB 1+ S$ 45·20
687-7840 USB to RS-422 converter PCB 1+ S$ 48·80
687-7837 USB to RS-485 converter PCB 1+ S$ 44·80
PCBs providing USB to RS-232, RS-422 or RS-485 Serial UART
interface. FTDI’s royalty-free VCP drivers allow for communication
as a standard emulated COM port and D2XX ’direct’ drivers
provide a DLL application programming interface.
687-7828 USB to RS232 converter cable 1.8m, 0V out 1+ S$ 39·50
687-7821 USB to RS232 converter cable 1.8m, 5V out 1+ S$ 37·00
687-7819 USB to RS232 converter cable 5m, 5V out 1+ S$ 64·50
687-7831 USB to RS422 converter cable 1.8m 1+ S$ 57·00
687-7834 USB to RS485 converter cable 1.8m 1+ S$ 48·80
USB to RS-232 or RS-422 or RS-485 levels Serial UART converter cables.
429-262 UB232R USB to Serial Development Module 1+ S$ 22·30
The UB232R is the smallest USB - Serial module in the FTDI
product range. To minimise the size of the module, the UB232R
uses a standard USB mini-B connector. It is ideal for new
development purposes and also for adding a USB interface to
existing product designs. Based on the FT232RQ device, the
UB232R supports RTS/CTS hardware handshaking and is powered
from the USB port. Serial data communication is possible at up to
3MBaud at TTL level.
429-278 USB to Serial TTL conv. PCB 5V 1+ S$ 25·40
429-284 USB to Serial TTL conv PCB 3V3 1+ S$ 22·40
USB to Serial (TTL level) converter adaptor PCBs which provide a
simple way to connect TTL interface devices to USB.
687-7770 Converter cable 5V SIL6 1+ S$ 30·70
429-307 Converter cable 3V3 SIL6 1+ S$ 29·90
687-7786 Conv. cable 5V wire ended 1+ S$ 30·80
429-303 Conv. cable 3V3 wire ended 1+ S$ 33·90
687-7774 Conv. cable 5V 3.5mm Plug 1+ S$ 35·60
687-7783 Conv. cable 3V3 3.5mm Plug 1+ S$ 39·20
687-7780 Conv. cable 3V3 8-way 2mm 1+ S$ 45·80
USB to Serial (TTL level) converter adaptor cables which provide a
simple way to connect TTL interface devices to USB.
429-290 VMUSIC2 Development Module 1+ S$ 62·00
The VMUSIC2 module is a product which not only lets you add
USB Flash disk interfacing to your product, but also allows you to
play back MP3 and other popular digital music formats directly
from a USB flash disk. Only four signal lines plus 5V supply and
ground are required to be connected.
One USB "A" socket to connect to a USB Flash Drive
Stereo 3.5mm headphone jack socket for audio playback
Audio line-out connector
Jumper selectable UART or SPI interfaces
Traffic indicator LED
429-296 VDRIVE2 Development Module 1+ S$ 37·30
The VDrive2 module provides an easy solution for adding a USB
Flash disk interface to an existing product. Only four signal lines
plus 5V supply and ground are required to be connected.
One USB "A" socket to connect to a USB Flash Drive
Link selectable UART or SPI interface
Easy to implement command set
Traffic indicator LED
406-552 MCU to USB Host Controller Module 1+ S$ 36·60
MCU to USB host controller development module for the Vinculum
VNC1L device. The VDIP1 is supplied as a PCB designed to fit a 24-
pin DIP socket and provides access to all UART, SPI and FIFO
interface pins of the VNC1L device. Ideal for rapid prototyping and
development of VNC1L designs, these modules are also suitable
for incorporation into low/medium volume finished product
designs.
Jumper selectable UART, SPI or FIFO MCU interfaces
USB "A" type socket(s) to interface with USB peripherals
Single +5V supply input
Auxiliary +3.3V @ 200mA power output to power external logic
Power Good and Traffic Indicator LEDs
406-584 UM245R USB to Parallel FIFO Dev. Module 1+ S$ 26·50
The UM245R module is a USB - Parallel FIFO interface (TTL)
development module for the FT245R IC device. It is supplied on a
PCB designed to fit a 24 pin DIP socket, and provides access to all
FIFO interface and control pins (TXE#, RXF#, RD#, WR) of the
FT245R device. Can be configured as either USB bus-powered or
self-powered and also supports 5V or 3V level interface IOs via two
sets of jumper setting pins. Data transfer at up to 1 MegaByte per
second.
787
www.nguyenxuong.com