User guide

Memory, Micros, Embedded Computing & Peripherals
ON-LINE
www.rssingapore.com
28
OM = Order Multiple
USB-COM232-PLUS1: Single channel USB to RS-232
communications module. Utilises the FTDI FT232R
USB-COM232-PLUS2: Single USB to 2 independent RS-232 port
module, using the FTDI FT2232H (USB 2.0 Hi-Speed)
USB-COM232-PLUS4: Single USB to 4 independent RS-232 port
module, using the FTDI FT4232H (USB 2.0 Hi-Speed)
RS-232 level shifters are included, plus Power/TXD/RXD LEDs
USB-COM422-PLUS1: Single channel USB to RS-422
communications module. Utilises the FTDI FT232R
USB-COM422-PLUS2: Single USB to 2 independent RS-422
port module, using the FTDI FT2232H (USB 2.0 Hi-Speed)
USB-COM422-PLUS4: Single USB to 4 independent RS-422
port module, using the FTDI FT4232H (USB 2.0 Hi-Speed)
RS-422 level shifters are included, plus Power/TXD/RXD
LEDs
USB-COM485-PLUS1: Single channel USB to RS-485
communications module. Utilises the FTDI FT232R
USB-COM485-PLUS2: Single USB to 2 independent RS-485
port module, using the FTDI FT2232H (USB 2.0 Hi-Speed)
USB-COM485-PLUS4: Single USB to 4 independent RS-485
port module, using the FTDI FT4232H (USB 2.0 Hi-Speed)
RS-485 level shifters are included, plus Power/TXD/RXD
LEDs
406-568 UM232R USB to Serial UART Dev. Module 1+ S$ 23·90
The UM232R module is a USB - Serial UART (TTL) development
module for the FT232R IC device. It is supplied on a PCB designed
to fit a 24 pin DIP socket, and provides access to all UART and
CBUS interface pins of the FT232R device. Configured as either
USB bus-powered or self-powered and also supports 5V or 3V level
interface IOs via two sets of jumper setting pins. Full hardware
handshaking is supported and the UM232R can communicate at up
to 3MBaud at TTL/CMOS levels.
687-7768 USB 2.0 Mini-Module, FT2232H 1+ S$ 44·00
687-7777 USB 2.0 Mini-Module, FT4232H 1+ S$ 48·60
The FT2232H Mini-Module is a USB-to-Serial/FIFO development
module that utilizes the FT2232H USB Hi-Speed Two-port bridge
chip
The FT4232H Mini-Module is a USB-to-Serial/MPSSE development
module that utilizes the FT4232H USB Hi-Speed Four-port bridge
chip
The IC handles all the USB signalling and protocols
Ideal for development purposes to quickly prove functionality of
adding USB to a target design
406-562 MM232R Development Module 1+ S$ 23·00
The MM232R is a mini development module for the FT232RQ IC
device. It is a little bigger than a USB connector, and provides USB
- Serial UART interface in a extremely small form factor. It is ideal
for adding a USB interface to existing product designs. Based on
the FT232RQ device, the MM232R supports RTS/CTS hardware
handshaking and is powered from the USB port. Serial data
communication is possible at up to 3MBaud at TTL level. In
addition, some of the EEPROM configurable CBUS pins of the
FT232R are brought out allowing the MM232R to be used to
provide clock signals to external logic.
406-556 EVAL232R USB to RS232 Eval. Module 1+ S$ 39·50
The EVAL232R is a USB to RS232 development and evaluation
module for the FT232RL IC device. Additional header pins on the
board which provide access to the FT232RL device’s configurable
CBUS interface pins. Powered from USB, the EVAL232R supports
both 5V and 3V level IO interface voltage on the CBUS via a jumper
setting. Full RTS/CTS, and DTR/DSR hardware handshaking are
supported , DCD and RI are also available. RS232 communication is
possible at up to 250kBaud. LEDs are fitted to indicate activity on
the FT232RL’s TXD and RXD lines, thus showing when the module
is transmitting, or receiving data.
687-7746 USB to RS485 Adapter Module 1+ S$ 34·50
687-7755 USB to Dual RS485 Module 1+ S$ 56·50
687-7758 USB to Quad RS-485 Module 1+ S$ 94·00
The USB-COM-PLUS modules provide a simple method of
adapting legacy RS485 devices to modern USB ports.
687-7752 USB to RS422 Adapter Module 1+ S$ 45·50
687-7761 USB to Dual RS422 Module 1+ S$ 84·50
687-7764 USB to Quad RS422 Module 1+ S$ 121·00
The USB-COM-PLUS modules provide a simple method of
adapting legacy RS422 devices to modern USB ports.
687-7730 USB to RS232 Adapter Module 1+ S$ 25·30
687-7749 USB to Dual RS232 Module 1+ S$ 47·80
687-7742 USB to Quad RS-232 Module 1+ S$ 68·50
The USB-COM-PLUS modules provide a simple method of
adapting legacy RS232 devices to modern USB ports.
624-3607 ColdFire MCF523x Evaluation Board 1+ S$ 1550·00
The M523xEVB evaluation board is intended to provide a mechanism for easy customer evaluation of the MCF523x family of ColdFire
microprocessors and to facilitate hardware and software development. The EVB can be used by software and hardware developers to test
programs, tools, or circuits without having to develop a complete microprocessor system themselves. The heart of the evaluation board is
the MCF5235, all other MCF523x family members have a subset of the MCF5235 specification and can therefore be fully emulated using the
MCF5235 device.
MCF5235 microcontroller, 150MHz, 2MByte external Page Mode Flash, 32MByte SDRAM
BDM Debug Development connector
10/100Mbps Ethernet PHY with RJ-45 connector
2xCAN transceivers with DB-9 connectors
2xSerial ports with DB-9 connectors
All internal module signal connectors available via four, 60-pin expansion connectors
Breakout connector for serial interfaces (eTPU, I
2
C, QSPI, GPIO)
ADC Interface
Chip configuration capability
Multiple clocking options & Debug monitor
Power Port with Power Supply Access
Power supply input: +6 to +14Vdc
710-5553 Programmable Clock Generator Kit 1+ S$ 44·30
Select from over 100 predefined configurations using the CY22800
and InstaClock software or use the CY22801 for custom clock
configurations. The CyberClocks software tool allows users to
specify the XIN/CLKIN frequency, crystal load capacitance and
output frequencies for the CY22801. Both devices are programmed
with the same board included in this kit and the selected
configuration is then downloaded via USB to the programmer.
Kit includes: Programming board with a USB cable, 3 samples
each of the CY22800 and CY22801 devices
The latest programming software is available from
www.cypress.com/instaclock
710-5565 PSoC
ᓼ CapSense ᓽ Controller Kit 1+ S$ 176·50
The CY3280-BK1 Universal CapSense Controller Kit is designed for
easy prototyping and debug of CapSense designs with pre-defined
control circuitry and plug-in hardware.
CY3280-20x34 & -21x34 Universal CapSense Controller Boards
CY3280-SLM Universal CapSense Linear Slider Module
CY3280-BBM Universal CapSense Prototyping Module
CY3240-I2USB Board
CY3210 MiniProg1 Programmer
PSoC Express, Designer and Programmer Installation CDs
CY3280-BK1 Universal CapSense Controller Kit CD
1.5 and 3mm Polycarbonate Overlays
USB 2.0 Retractable Cable
710-5547 PSoC
ᓼ 3 Analog Voltmeter Demo Kit 1+ S$ 148·00
PSoC programmable system-on-chip architecture gives you the
freedom and the capability to get products to market quickly
Explore PSoC 3’s precision analogue capabilities through the on
board 20-bit Delta Sigma ADC used to measure voltage ranges
between -30 V and 30 V
Kit includes
PSoC 3 Precision Analogue Voltmeter Demo Kit
Quick Start Guide
Kit CD with PSoC Creator, PSoC Programmer, Projects and
Documentation
786
www.nguyenxuong.com