User guide
Memory, Micros, Embedded Computing & Peripherals
ON-LINE
www.rssingapore.com
28
OM = Order Multiple
Supports devices with debugWIRE Interface
Supported by AVR Studio and AVR32 Studio
USB or RS-232 communication with PC
Powered by USB port
Debug interfaces: JTAG (IEEE 1149.1), debugWire, PDI,
Nexus (IEEE-ISTO 5001(TM)-2003) auxiliary interface for
high-speed trace
Programming interfaces: ISP, JTAG and PDI
Interfaces with AVR32 Studio 2 and newer, and AVR
Studio 4.15 and newer
AT32UC3A3256 microcontroller
USB On-the-Go
SD/MMC Card socket
Stereo 16-bit DAC
Reference hardware and software for generic MP3
player docking stations
ATmega328 16MHz
32KB Flash memory
2KB RAM
1KB EEPROM
Fitted with an AT91SAM7S256 (64-pin PQFP package)
USB interface, 2x RS232 port
JTAG/ICE debug interface
Four buffered analogue inputs
Four general-purpose LEDs and pushbuttons
Expansion connector
Prototyping area
696-2358 AT91SAM7SE-EK Evaluation Kit 1+ S$ 385·00
The AT91SAM7SE-EK evaluation board enables evaluation and
code development of applications running on an AT91SAM7SE 32-
bit ARM7 microcontroller device. An AT91 software package with C
and assembly listings is also provided. This allows the user to
begin evaluating the AT91 ARM
ᓼ
Thumb
ᓼ
32-bit microcontroller
quickly.
696-2370 AT91SAM7S-EK Evaluation Kit 1+ S$ 193·00
The AT91SAM7S-EK evaluation board enables the evaluation of,
and code development for applications running on an
AT91SAM7Sxx 32-bit ARM7 microcontroller device. An AT91
software package with C and assembly listings is also provided.
This allows the user to begin evaluating the AT91 ARM
ᓼ
Thumb
ᓼ
32-bit microcontroller quickly.
AT32AP7000 processor, 2x Ethernet port, SD/MMC card reader,
USB interface, JTAG interface, RS-232 interface
Preloaded with Linux and shipped with I/O interface drivers that
can be called from user’s code
696-2544 ATNGW100 Network Gateway Kit 1+ S$ 188·50
The NGW100 kit combines Atmel’s AVR32 Digital Signal Processor
CPU with an unrivalled selection of communication interfaces. It is
designed specifically to allow you to explore network applications
under Linux. It also provides a USB and RS-232 interface and so is
not limited to solely network based projects.
696-2440 ATEVK1105 Evaluation Kit 1+ S$ 310·00
The AVR32 EVK1105 is an evaluation kit for the AT32UC3A0512,
which demonstrates Atmel’s AVR32 microcontroller in Hi-Fi audio
decoding and streaming applications.
696-2452 ATEVK1104 Evaluation Kit 1+ S$ 295·00
The AVR32 EVK1104 is an evaluation kit which combines Atmel’s
AVR32 microcontroller with an unrivalled selection of
communication interfaces.
696-2437 AVR ONE! Debug/Programmer 1+ S$ 1030·00
The AVR
ᓼ
ONE! is a powerful development tool for on-chip
debugging and programming of all AVR32 and AVR XMEGA
devices.
696-2434 AVR JTAGICE mkII Debug/Programmer 1+ S$ 520·00
The JTAGICE mkII is a powerful development tool for On-chip
Debugging of all AVR 8-bit RISC MCUs and AVR32 32-bit DSP/
MCUs with an IEEE 1149.1 compliant JTAG interface.
696-2597 Socket and Adapter Boards 1+ S$ 188·50
The STK600-TQFP144 package contains a socket board and adapter
boards for 144-pin TQFP 0.5mm pitch devices, and is an expansion
module for the STK600 Starter Kit.
Socket cards route each pin from the IC socket to separate pins
on the spring loaded
connectors on the bottom side, facing the routing card
384-935 AVR STK500 Starter Kit 1+ S$ 126·00
A starter kit and development system for Atmel’s AVR
ᓼ
8-Bit RISC
Flash microcontrollers. The STK500 gives designers a quick start to
develop code on the AVR combined with features for using the
starter kit to develop prototypes and test new designs. It interfaces
with Atmel’s AVR Studio
ᓼ
and is compatible with the STK501
expansion module which adds 64-pin support
RS-232 Interface to PC for programming and control
Sockets for 8-pin, 20-pin, 28-pin, and 40-pin AVR devices
Parallel and serial high-voltage programming of AVR devices
Serial In-System Programming (ISP) of AVR devices
696-2566 AVR Dragon Debug/Programmer 1+ S$ 86·00
The AVR Dragon supports all programming and on-chip debugging
modes for all AVR MCUs. It can be used with an external target
board as well as an on-board prototype area, allowing
programming and debugging without additional hardware.
In-System Programming (ISP) 3-wire AVR programming
protocol
Parallel Programming and High-Voltage Serial Programming
debugWIRE One-wire AVR debugging protocol
JTAG and debugWIRE emulation support for devices with 32KB
or less Flash memory
JTAG Programming 4-wire IEEE
ᓼ
1149.1 compliant JTAG
interface
696-2563 AVRISP mkII In-System Programmer 1+ S$ 54·50
AVR In-System Programmer mkII is used for field upgrades of AVR
Flash microcontrollers.
Supports all 8-bit AVR devices with ISP Interface
AVR Studio
ᓼ
compatible (AVR Studio 4.12 or later)
Programs both Flash and EEPROM
Supports fuses and lock-bit programming
Supports target voltages from +1.8 to +5.5V
PC communication and power by USB – No external power
supply required
696-2399 ATDVK90CAN1 Development Kit 1+ S$ 179·00
The ATDVK90CAN1 Development Kit is designed to give designers
a quick start to develop code on the AT90CAN128 AVR
microcontroller.
AT90CAN128 TQFP device (3 or 5V)
AVR Studio
ᓼ
software interface
STK500 compatible
ISP connector for on-chip ISP
JTAG connector
Serial interfaces: Two RS-232C, SPI, TWI, CAN, LIN
784
www.nguyenxuong.com