User guide
Memory, Micros, Embedded Computing & Peripherals
ORDERLINE
65 6865 3433
28
Visit our website for additional price information and exciting promotions
The STM3210B-EVAL board is a complete development platform for the STM32F10x (128 K) series of
ARM
ᓼ
Cortex
ᓽ
-M3 core-based microcontrollers. It provides a flexible and open design ideal for
demonstrating device capabilities and rapidly evaluating features and peripherals.
STM8L152C6T6 MCU, 32KB Flash, 2KB RAM, 1KB EEPROM in
48-pin LQFP
Extension header for all QFP48 I/Os for quick connection to
prototyping board for easy probing
Powered by USB or external supply of 3.3 or 5V
Can supply target application with 3 and 5 Volts
Red LEDs for USB comms and 3.3 V power on
Two user LEDs, LD3 and LD4 (green and blue)
Two pushbuttons (User and Reset)
IDD current measurement
LCD 28-pin DIP (24 segments, 4 commons)
On-board ST-Link with selection mode switch to use the kit as a stand-alone ST-Link (with SWIM
connector for programming and debugging)
727-6535 STM8L Ultra Lo-Pwr Discovery 1+ S$ 19·20727-6526 STM32 Value Line Discovery Eval Board 1+ S$ 27·20
Contains STM32F100RB MCU, 128KB Flash, 8KB RAM in 64-pin LQFP. On-board ST-Link with selection
mode switch to use the kit as a stand-alone ST Link (with SWD connector)
STM32F100RB Microcontroller, 128KB Flash, 8KB RAM in 64-
pin LQFP
On-board ST-Link with selection mode switch to use the kit as a
stand-alone ST Link (with SWD connector)
Designed to be powered by USB or an external supply of 5 or
3.3 Volts
Can supply target application with 5 and 3 Volts
Two user LEDs (green and blue)
One user pushbutton switch
Extension header for all QFP64 I/Os for quick connection to
prototyping board or easy probing
721-1320 LED Lighting Control Demonstration Board 1+ S$ 108·50
Using DMX512, based on the STM32F103C6 ARM Cortex-M3 microcontroller and STCS1A constant
current led driver, with jumper settings to configure the board in transmitter, receiver or stand-alone
mode. The STCS1A device provides dimming control of the on-board LEDs.
Over/undervoltage protection using the STBP120 voltage protection device
Uses the ESDAULC6-3BP6 ESD protection device for advanced USB protection
Option of powering the LEDs from an external source or through a 5V output from the STBP120
Board uses an internal clock source, without a crystal
Mini-B type USB connector can be used if LEDs supplied from external source
714-0439 Eval board for STM3210E MCU 1+ S$ 445·00
A complete development platform for the ARM Cortex-M3 core-based STM32F103ZGT6 MCU which
allows evaluation of all peripherals plus development of user applications.
128 Mbyte MicroSD Card
ᓽ
or bigger
Both A and B type smartcard support
64 or 128 Mbit serial Flash, 512Kx16 SRAM, 512Mbit or 1Gbit NAND Flash and 128Mbit NOR Flash
I
2
C/SMBus compatible serial interface temperature sensor
IrDA transceiver, USB 2.0, CAN 2.0A/B, 2x RS232
I
2
S audio DAC, stereo audio jack
Induction motor control connector
JTAG and trace debug support
Joystick with 4-direction control and selector
402-229 STM32F10xB Evaluation Board 1+ S$ 415·00
Includes an STM32F103B microcontroller
Full speed USB 2.0 interface
CAN 2.0A/B compliant interface
Two I
2
C channels
Two SPI channels
Three USART channels with Smart Card support
629-1224 STX-RLink Programmer and Debugger 1+S$ 107·00
Raisonance’s versatile, low-cost, in-circuit debugger and programmer for a complete range of STM
MCUs (STM8, ST7,
μ
PSD, STM32, STR7 and STR9). Use with application or evaluation boards for in-
circuit programming and debugging via an industry standard JTAG connection for ARM
ᓼ
core-based
and
μ
PSD MCUs, via STMicroelectronics’ SWIM connection for STM8, or via an in-circuit comms
connection for ST7 MCUs. RLink, driven by Raisonance’s Ride7 integrated development environment
provides both unlimited in-circuit debugging and programming of applications for STM8, ST7 and
μ
PSD, or in-circuit debugging of up to 32Kbytes of code for STM32, STR7 and STR9, and unlimited in-
circuit programming of applications for these devices.
For more details and features visit rswww.com
232-632 ST Realizer
ᓼ
II Apps Programming Package 1+ S$ 395·00
ST-Realizer
ᓼ
is an application programming package that allows you to create embedded application
programs ready to be loaded into ST6 and ST7 microcontrollers without having any knowledge of
assembler code or C. Symbols are used that represent programming functions to create flow diagrams
that perform your application functions.
Requires Windows 95, 98, 2000 or NT
355-2885 ST62xx Microcontroller Starter Kit 1+ S$ 345·00
The ST622x Starter Kit provides all that is needed to start designing, developing and evaluating
programs for ST620x, ST621x and ST622x microcontrollers.
LED indicators, Reset and data control buttons, Resistance trimmer, Temperature control circuit,
RS-232 port, Parallel port, User port
Supplied with:
2xST62E25, 2xST62E20 and 1xST62E01, RS-232 cable, CD containing: AST6 assembler and LST6
linker, ST6 Windows debugger, WGDB6, Windows ST6 microcontroller programmer, Epromer,
demonstration programs.
795
www.nguyenxuong.com