User guide
Memory, Micros, Embedded Computing & Peripherals
ON-LINE
www.rssingapore.com
28
OM = Order Multiple
435-803 C Compiler for PIC32 Family 1+ S$ 1470·00
A full-featured ANSI compliant C compiler for Microchip’s PIC32
family of 32-bit MCUs with no code size limit and complete
functionality for 60 days. (Usable thereafter with some
optimization levels disabled)
Fully compatible with Microchip’s MPLAB IDE and popular
third party IDEs
DSP library: C callable DSP functions written in assembly
using the standard MIPS DSP library APIs
Even smaller Code size: Use 16-bit instruction mode for up to
40% size reduction
Small and fast: Mix 16- and 32-bit instructions in the same
source file
623-1187 PICSTART
ᓼ
Plus Flash Upgrade Module 1+ S$ 51·50
The PICSTART
ᓼ
Plus Flash Upgrade Module is a PCB that
contains a PIC18F6720 device programmed with firmware needed
to support a specific set of devices in the MPLAB IDE.
Replaces the PIC17C44 in the PICSTART Plus
Supports MPLAB Integrated Development Environment (IDE)
Future upgrades can be Flash programmed into the supplied
device
Future upgrades can be downloaded to extend device support
For PICSTART Plus units prior to Revision R20 only
Wireless router
ZeroG PICtail
ᓽ
Board
Pre-programmed PIM with Microchip’s free TCP/IP stack and
radio driver
Explorer 16 development board and power supply NOT
included in the kit. Router requires a 110Vac mains supply.
Real-time execution and real time trace collection
Stopwatch & Real time clock
Full hardware debugging: breakpoints, single-step, variable
inspect/modify
Logic probe inputs/outputs (8)
I/O Port trace and SPI trace options for high speed upload of
trace data
Over voltage/short-circuit monitor protection
High speed USB 2.0 communications
dsPICDEM MCSM board, dsPIC33FJ43MC204 DSC Module
(MA330017), USB to mini-USB cable, CD ROM with MCSM
User’s Guide, data sheets, application note with software and
MPLAB DMCI/RTDM GUI for Stepper Motor Control, 24V PSU
and Stepper Motor.
RS-232 or USB interface; ICSP
ᓽ
interface
SQTP
ᓼ
serialization for programming unique serial numbers while in
PC Host mode
An alternative DOS command line interface is available for batch
control
Field upgradeable firmware allows quick new device support
SD/MMC Flash memory card socket
Supports PROMATE
ᓼ
II socket modules via adapter (sold separately)
Complete line of interchangeable socket modules to support all
Microchip devices and package options available
Unlimited Memory Usage
Fully integrates into MPLAB
ᓼ
IDE
Runs on all platforms: Windows (including 64-bit Vista),
Linux and Mac OS X
Powered via USB
Test points for all GPIO pins
9-pin D-sub connector for RS-232
Mini-USB connector
Tx and Rx LEDs for indicating USB to UART traffic (when
enabled)
Software for configuring special features of the device
704-3212 MCSM Development Board 1+ S$ 380·00
Controls stepper motors in open- or closed-loop mode, with no
hardware changes for 4-, 6- or 8-wire motors in either unipolar or
bipolar configuration. Features include full or variable micro-
stepping, GUI for controlling step commands, motor parameter
input and operation modes; mounting option to connect either a
28-pin SOIC device or a generic 100-pin Plug-In Module.
The Kit includes:
699-0448 MCP2200 USB to RS-232 Demo Board 1+ S$ 36·90
The MCP2200EV-VCP is a USB-to-RS232 development and
evaluation board for the MCP2200 USB-to-UART device. The board
allows for easy demonstration and evaluation of the MCP2200.
For list of features and more product details visit RS online
549-372 PICDEM PIC18 Explorer Board 1+ S$ 155·50
A low-cost way to evaluate the PIC18 MCU families. The PIC18 is
the highest performance 8-bit architecture and has three different
families: standard PIC18, PIC18 J-series and PIC18 K-series. This
board supports dozens of the general purpose PIC18 families using
various processor Plug-In Modules. PICtail
ᓽ
daughter boards
allow the connection of different accessory boards to the PIC18
Explorer board. The board is also an ideal complement to the
MPLAB
ᓼ
PICkit 3 or ICD 3 debugger and programmer for a full-
featured, economical, PIC18 development environment.
681-1023 C compiler for PIC10/12/16 MCUs 1+ S$ 770·00
681-1027 C compiler for PIC18 MCU 1+ S$ 740·00
HI-TECH C compilers for PIC10/12/16 and PIC18 MCUs implement
the optimizations of Omniscient Code Generation
ᓽ
(OCG) - a
whole program compilation technology - to provide denser code
and better performance for development on PIC10/12/16 and PIC18
MCUs.
517-2661 MPLAB PM3 Universal Device Programmer 1+ S$ 1370·00
698-8877 MPLAB PM3 18L/28L/40L DIP Socket 1+ S$ 285·00
667-7937 MPLAB PM3 SOIC Socket Module 1+ S$ 325·00
681-0948 MPLAB PM3 44L TQFP Socket Module 1+ S$ 323·00
681-0941 MPLAB PM3 28/44L QFN Socket Module 1+ S$ 320·00
An easy-to-use Universal Device Programmer which operates with a PC or in stand-alone mode. It programs Microchip’s entire line of
PIC
ᓼ
devices as well as the latest dsPIC
ᓼ
DSC devices. Three operating modes: PC Host mode for full control, Safe mode for secure data,
Stand-alone mode for programming without a PC; in stand-alone mode data can be loaded and saved on an SD/MMC card (not
included).
182-7317 Beginners Guide to the Microchip PIC 1+ S$ 57·50
A comprehensive introduction to the PIC, how it works and how to
use it, this ring bound and illustrated book follows a basic flowchart
used in product development starting with an idea, moving
through hardware and software design, assembling and
debugging and finally onto programming the PIC. The
accompanying 3.5" IBM format disks contains the Microchip
MPLAB Windows development environment and a number of
source code examples and projects from the book.
234-0568 Development Programmer Kit 1+ S$ 265·00
A kit providing a highly-flexible, low-cost design tool set for all
Microchip PIC MCUs. Reads, programs and verifies EPROM &
EEPROM memory plus all configuration bits; programs and
verifies an address range. Operates with PC-compatible host
system running Windows under MPLAB IDE environment
MPLAB Project support to automatically download object file
to PICSTART Plus
MPASM
ᓽ
Assembler translates assembler source code to
object code
MPLAB SIM Windows-based simulator to model operation of
all PICmicro MCUs
PICC Lite
ᓽ
C compiler for PIC16F84 MCU
381-592 REAL ICE
ᓽ
Base probe kit 1+ S$ 780·00
686-8663 REAL ICE
ᓽ
performance pak 1+ S$ 250·00
In-Circuit Emulator system for debugging and programming PIC
ᓼ
and dsPIC
ᓼ
Flash MCUs. The emulator pod is controlled by a PC
running the MPLAB IDE
672-2756 PICtail
ᓽ
Plus ZeroG 802.11 Development Kit 1+ S$ 295·00
The ZeroG 802.11 Development Kit demonstrates 802.11
connectivity (Wi-Fi) via the ZeroG ZG2100M PICtail board for the
PIC-microcontroller-based Explorer 16 Development Board. The kit
provides everything the user needs to begin development of an
802.11 network..
792
www.nguyenxuong.com