User guide
Memory, Micros, Embedded Computing & Peripherals
ORDERLINE
65 6865 3433
28
New products available online every week
623-1058 PICDEM CAN-LIN 2 Demonstration Board 1+ S$ 285·00
This demonstration board allows users to explore the features of
PIC Microcontrollers with integrated CAN modules including
PIC18F258/2680, PIC18F458/4680.
Firmware pre-programmed on supplied sample device
Two on-board CAN nodes
On-board LIN Bus master and slave nodes via PIC16C432
RS-232 (DB9) Interface
Large prototyping area on board
Sockets for 28-pin SDIP, 20- and 40-pin DIP devices
Device pre-loaded with a USB bootloader
Supports MPLAB ICD 2
RS-232 (DB9) port
On board TC77 temperature Sensor with SPI interface
Potentiometer to demonstrate ADC function
623-1109 PICDEM
ᓽ
Mechatronics Demonstration Kit 1+ S$ 240·00
An easy-to-use Mechatronics development platform
demonstrating the implementation of intelligent control in a
mechanical system. Supplied jumper wires allow the user to
experiment by connecting the PIC MCU to various on-board
components including sensors, LEDs, human input devices and
motor drivers.
Populated with PIC16F917 microcontroller
On-board stepper and brushed DC motors
Optical speed sensor for DC motor and Light sensor
RS-232 (DB9) Interface and LCD module
ICSP
ᓽ
programming capability (using PICkit
ᓽ
2 programmer)
Connector for MPLAB ICD 2 Debugger
686-8694 PICtail
ᓽ
Plus 100Mbps Ethernet Board 1+ S$ 78·00
2-line 16-character LCD display
RS-232 (DB9) port
Prototyping area on board
Piezo sounder and temperature sensor
4xLEDs, 2x Pushbutton switch, master reset
2 line x 16 LCD display
Connector for MPLAB ICD 2 Debugger
RS-232 (DB9) Interface
Header for access to all device I/O pins
Prototyping area on board
LEDs, potentiometers and push-buttons on board
Fast 100 Mbps Ethernet PICtail
ᓽ
Plus Daughter Board for
evaluating and demonstrating the ENC424J600 and ENC624J600
stand-alone
10
⁄100 BaseT Ethernet controllers. It is compatible with
many host boards, including the Explorer 16, PIC32 I/O Expansion
Board, PICDEM.net
ᓽ
2 and PIC18 Explorer development boards.
ENC624J600 10 / 100 BaseT Ethernet controller with factory pre-
programmed MAC address
PICtail
ᓽ
Plus edge contacts for SPI or PSP connection to
Explorer 16 and PIC32 I/O Expansion Boards
PICtail
ᓽ
headers for SPI connection to PICDEM.net 2 and PIC18
Explorer Boards
Graphics display controller SSD1926 supporting 4/8bit STN,
4/8bit CSTN, 18bit HR-TFT, and 9/12/18/24bit TFT interface
SD/MMC Card socket, connected to SSD1926 via 4-wire I/F
16Mbit (2Mx8) serial Flash memory for additional data storage
Display connector for interfacing with different display boards
PIC32 Starter Kit connector
ICSP
ᓽ
/MPLAB ICD 2 interface connector for in-circuit
programming and debugging
2-line 16-character alpha-numeric LCD display
PICtail
ᓽ
connector for future expansion boards
Web server with HTML support
2x Ethernet interface (RJ-45)
8x8cm board provides access to all the processor pins
General purpose prototyping area
Kit contains three boards
For more details and a full list of features and functions visit RS
online
686-8675 PICtail
ᓽ
Plus Graphics Controller Board 1+ S$ 104·50
The Graphics LCD Controller PICtail
ᓽ
Plus SSD1926 is a demo
board for evaluating Microchip’s graphics displays and library for
16- and 32-bit MCUs. It is compatible with the Explorer 16
development board (DM240001) or one of the PIC32 starter boards
(DM320001, DM320003).
681-0957 PICtail
ᓽ
Plus Graphics Board & Panel 1+ S$ 255·00
The Graphics PICtail
ᓽ
Plus Daughter Board with 3.2 Display Kit for
evaluation of hardware and graphics library for 16- and 32-bit
MCUs. It includes a Graphics LCD Controller PICtail
ᓽ
Plus
SSD1926 Board (AC164127-5) and a Graphics Display Truly 3.2
240x320 Board (AC164127-4). Compatible with the Explorer 16
development board (DM240001) or PIC32 Starter Boards
(DM320001, DM320003).
4.3WQVGA (480x272) TFT LCD with 24-bit parallel RGB interface
Resistive 4-wire touch screen
698-8886 PICtail
ᓽ
Plus 4.3in Display Panel Board 1+ S$ 173·00
The Graphics Display Powertip 4.3 480x272 Board is a
demonstration board for evaluating Microchip Technology’s
graphic display solution and graphics library for 16- and 32- bit
microcontrollers. It is an expansion board compatible with the LCD
controller boards such as Graphics LCD Controller PICtail
ᓽ
Plus
SSD1926 Board (AC1 64127-5).
667-7918 PICtail
ᓽ
Plus Prototyping Board 1+ S$ 30·40
The Prototype PICtail Plus Daughter Board is an expansion
breadboard card for the Explorer 16 Development Board using a
PIC24 MCU or dsPIC33 DSC.
381-564 PICDEM.net
ᓽ
2 Development Board 1+ S$ 255·00
An Internet/Ethernet board supporting both the popular
ENC28J60 Ethernet Controller and the single-chip Ethernet MCU
family PIC18F97J60. Using Microchip’s free TCP/IP stack, a web
server can be developed with the capability to remote monitor
and control embedded applications over the Internet.
623-1070 PICDEM USB 2.0 Demonstration Board 1+ S$ 95·00
The PICDEM
ᓽ
FS-USB is a demonstration and evaluation board
for the PIC18F4550 family of Flash microcontrollers with full speed
USB 2.0 interface.
623-1121 PICDEM
ᓽ
HPC Explorer Board 1+ S$ 93·50
This demonstration board is ideal to evaluate the performance of
PIC18F series 8-bit microcontrollers. The board features a
PIC18F8722 MCU, which is the superset of the entire PIC18Fxxxx
+5V MCU family. The board can easily be used to evaluate the
PIC18 J-series +3V devices.
Full pin break-out for easy wire-wrap/prototyping
Daughter board and MPLAB ICE2000/4000 connector (switch
to disable on board processor)
Connection for MPLAB ICD 2 (In-Circuit Debugger) for in-circuit
programming and debugging
Extended PICtail
ᓽ
connector
623-1064 PICDEM 4 Demonstration Board 1+ S$ 192·00
This board can be used to evaluate and demonstrate the
capabilities of the 8-, 14- and 18-pin PIC12F, PIC16F and PIC18F
microcontrollers.
623-1086 PICDEM 2 Plus Demonstration Board 1+ S$ 140·00
The PICDEM
ᓽ
2 Plus demonstrates the capabilities of many of the
18-, 28- and 40-pin PIC16xxxx and PIC18xxxx devices. It can be
used stand-alone with a programmed part, with an in-circuit
emulator (e.g., MPLAB ICE or MPLAB REAL ICE
ᓽ
) or with an in-
circuit debugger, MPLAB ICD 2. An active program is loaded on the
installed PIC18F452, and a PIC16F877 is included with its own
demonstration program.
791
www.nguyenxuong.com