User guide
Memory, Micros, Embedded Computing & Peripherals
ON-LINE
www.rssingapore.com
28
OM = Order Multiple
667-7805 rfPIC
ᓼ
Development Kit 1+ S$ 205·00
The rfPIC
ᓼ
Development Kit 1 provides design engineers with an
easy way to evaluate unidirectional, remote sense and control
wireless links based on the rfPIC12F675 and rfRXD0420/0920
devices.
PICkit
ᓽ
1 Flash Starter Kit
433.92 MHz and 315 MHz transmitter modules
433.92 MHz and 315 MHz receiver modules
623-0718 Universal Prog. Module for MPLAB ICD 2 1+ S$ 62·50
Low pin count, 8 / 14 / 20pin PIC16F690 Demo Board
ICSP
ᓽ
6-pin connector for PICkit
ᓽ
2 programmer
RJ-11 to ICSP
ᓽ
adapter and cable available separately
Protocols supported: I
2
C Master/Slave, SPI Master, USART Asynchronous/Synchronous, LIN (external hardware required to meet
electrical specifications), MICROWIRE
28-Pin Demo Board includes a PIC16F886, switch, LED(s), connector for the PICkit
ᓽ
analyser and ample prototype area
Processor contains demonstration firmware supporting I
2
C communication and emulation of 3 I
2
C devices: EEPROM, ADC and Real
Time Clock
This module contains a ZIF Socket that can accommodate 18, 28
and 40 pin DIP packaged Flash based PIC devices, enabling the
MPLAB ICD 2 to program these devices
True ZIF socket
MPLAB ICD 2 driven
Can be used with PICSTART
ᓽ
Plus with minor modification
Includes both PIC24FJ128GA010 and dsPIC33FJ256GP710 PIM
modules
Alphanumeric 16 x 2 line LCD display
Interfaces to MPLAB ICD 2 and MPLAB REAL ICE
ᓽ
USB and RS-232 interfaces
PICTail
ᓽ
Plus connector
Prototyping area on board
Temperature sensor (TC1047A)
USB (full speed 2Mbits/sec) and RS-232 interface to host PC
Supports low voltage target systems (2.0 to 6.0V)
Diagnostic LEDs (Power, Busy, Error)
Reading/Writing memory space and stack of target
microcontroller
Freeze on halt
Full-speed real-time emulation
Ruggedized interface
Supports all MPLAB ICD 2 headers
Powerful debugging
Full-speed real-time emulation
Ruggedized interface
Supports all MPLAB ICD 2 headers
623-1143 PICDEM Explorer 16 (100 pin) Kit 1+ S$ 198·00
The Explorer 16 is a low cost, efficient development board to
evaluate the features and performance of the 16-bit PIC24
microcontroller, the dsPIC33 Digital Signal Controller (DSC)
families and the 32-bit PIC32MX devices.
687-2741 ICD 3 Evaluation Kit (with Explorer 16) 1+ S$ 460·00
MPLAB ICD 3 In-Circuit Debugger System is the latest high-speed
emulator for Microchip Flash devices. It debugs and programs
these devices with the powerful, yet easy-to-use GUI of MPLAB
IDE. Programming times are typically 15x faster than previous
systems. A 40MHz dsPIC33 and high-speed FPGA yield faster
comms, downloads and debugging. The complete kit introduces
the developer to Microchip’s family of 16-bit MCUs with all the
tools for writing code in C, debugging and programming.
Full-speed real-time emulation
Ruggedized interface
Supports all MPLAB ICD 2 headers
687-2747 ICD 3 Evaluation Kit (with PICDEM 2 Plus) 1+ S$ 350·00
MPLAB ICD 3 In-Circuit Debugger System is the latest high-speed
emulator for Microchip Flash devices. It debugs and programs
these with the powerful, easy-to-use graphical user interface of
MPLAB IDE. Programming times are typically 15x faster than
previous systems. A 40MHz dsPIC33 and high-speed FPGA yield
faster comms, downloads and debugging. The complete kit
introduces the developer to Microchip’s family of 8-bit MCU
hardware debugging and programming devices.
660-1264 ICD 3 In-Circuit Debugger/Programmer 1+ S$ 280·00
MPLAB ICD 3 In-Circuit Debugger System is Microchip’s most cost
effective high-speed debugger for Microchip Digital Signal
Controller (DSC) and microcontroller devices. It debugs and
programs PIC Flash MCUs and dsPIC DSCs with the powerful, yet
easy-to-use graphical user interface of MPLAB Integrated
Development Environment (IDE). MPLAB ICD 3 supports all
Emulation headers. MPLAB ICD 3 is faster than the MPLAB ICD 2.
615-3037 ICD 2 In-Circuit Debug/Prog Eval Kit ws version 1+ S$ 340·00
In-Circuit Debugger (ICD) 2 allows the debugging of a range of PIC
microcontrollers through the MPLAB
ᓼ
Integrated Development
Environment (IDE) GUI. The MPLAB ICD 2 module links a PC and
the users target board allowing direct in-circuit debugging of the
target microcontroller in real time.
623-0982 ICD2 & ICD3 header PIC16F627A/28A/48A 1+ S$ 54·50
18-pin (PIC16F627A/28A/48A) devices with limited I/O make
integrated in-circuit debugging impractical. Instead, in-circuit
debugging is made possible by using a header containing an
equivalent device with integrated in-circuit debugging peripheral.
For debugging, the header is connected to the MPLAB ICD
2
⁄3
module via the MPLAB ICD
2
⁄3 connector and is inserted into the
target socket with a stand-off connector.
667-7980 Low Pin-Count USB Development Kit 1+ S$ 91·50
The Low Pin Count USB Development Kit provides an easy, low-
cost way to evaluate PIC18F14K50 and PIC18F13K50 20-pin USB
microcontrollers. Created with the USB novice in mind, the kit
includes a self-directed course and lab material designed to ease
the learning curve associated with adding USB connectivity to
embedded systems. This kit includes the PICkit
ᓽ
2 debugger/
programmer.
USB mini-B connector
PICkit
ᓽ
2 Debugger/Programmer connection header
PICkit
ᓽ
Serial Analyzer connection header
PICtail
ᓽ
daughter board expansion header
RS-232 connector and Prototyping area
381-554 PICkit
ᓽ
Serial Analyzer 1+ S$ 72·00
The PICkit
ᓽ
Serial Analyzer is a USB-based tool used to direct communication between a PC and an external serial device managing serial
communication with a device under test. The Windows
ᓼ
GUI configures the hardware and ’scripts’ communication with the target device.
Scripts can be conveniently assigned to push buttons or simply executed directly from the library index. Communication data / events are
posted to a transaction window.
149-922 PICkit
ᓽ
PIC16F690 Demo Board 1+ S$ 37·60
667-7889 RJ-11 to ICSP
ᓽ
adapter + cable 1+ S$ 15·60
Demonstration boards for various PIC microcontrollers designed to
work with the PICkit
ᓽ
2 programmer - for full range visit RS online.
790
www.nguyenxuong.com