User guide

CY3687 MoBL-USB FX2LP18 Development Kit User Guide, Doc. # 001-68582 Rev. *B 93
MoBL-USB Development Kit Firmware Examples
Figure 8-24. Debug Tab window in Project options
10. Select Settings under Keil Monitor-51 Driver and select relevant COM port for the UART cable
connected to SIO-1 port as shown in Figure 8-25 and Figure 8-26.
Figure 8-25. Settings Button for Keil Debug Monitor
Figure 8-26. UART Settings for Keil Debug Monitor
11.Click OK to close Target set up Window and then close the Options for Target "Target 1" win-
dow.
12.Select the Start/Stop Debug Session button on the Keil IDE as shown in the Figure 8-27.

