User guide

88 CY3687 MoBL-USB FX2LP18 Development Kit User Guide, Doc. # 001-68582 Rev. *B
MoBL-USB Development Kit Firmware Examples
Figure 8-15. A3 vendor command read operation using CyControlCenter
3. 0xA6 command-Get Chip Revision
To retrieve the current revision of the MoBL-USB FX2LP18) device this command is used.
Figure 8-16 of CyControlCenter summarizes the entire operation.
Figure 8-16. A6 Vendor Command using CyControlCenter
4. 0xA8 command-Disconnect and re-connect MoBL-USB FX2LP18
This command is used to disconnect and re-connect the MoBL-USB FX2LP18 IC using CPUCS
register. The MoBL-USB FX2LP18 re-enumerates again. Observe Cypress device disappearing
from CyControlCenter window and re-appearing back in the same window. Figure 8-17 summa-
rizes the command trigger using CyControlCenter.