User guide

CY3687 MoBL-USB FX2LP18 Development Kit User Guide, Doc. # 001-68582 Rev. *B 51
USB PC Host Utilities and SuiteUSB Applications
Figure 7-1. CyConsole Main Window Snapshot
As shown in the above figure it displays the connected Cypress USB 2.0 device (e.g MoBL-USB
FX2LP18 in this case) and its attributes like USB class and list of endpoints it supports.
Prior to firmware download the Record Script button on top left corner is used to record the entire
download process including the firmware binary embedded inside it. After firmware download is
complete the Stop Recording button is clicked to save the entire download into a script file -
xxx.spt.To verify the script it can be loaded using Load script button and played using Play Script.
Due to firmware embedded inside the script getting downloaded the MoBL-USB FX2LP18 develop-
ment board will re-enumerate again with new VID/PID defined in the firmware. The process of script
download was mentioned in detailed in section How to Generate and Play Script Files (.spt) on
page 45. Click on Options->EZ-USB Interface and the window shown below in Figure 7-2 pops up.