User guide

48 CY3687 MoBL-USB FX2LP18 Development Kit User Guide, Doc. # 001-68582 Rev. *B
Cypress USB Drivers for MoBL-USB FX2LP18 Kit
6.3.2 Keil Debug Monitor Download using Script and CyMonfx2lp18 Driver Package
The keil debug monitor is used to debug the firmware examples based on MoBL-USB FX2LP18 kit.
The keil monitor program is embedded in script file (mon_i2c.spt). The procedure to generate the
script file for a .hex file was explained in section. Using Sample keil monitor .hex programs located at
<Installed_directory>\<Version>\Target\Monitor the relevant script file can be generated. Alterna-
tively the current script file mon_i2c.spt can be used to debug the firmware example. The detailed list
of steps to debug a sample firmware example dev_io was explained in section Debugging Using Keil
Monitor Program on page 90.
6.4 SuiteUSB Driver Packages
Along with the MoBL-USB FX2LP18 kit contents SuiteUSB package is also provided. After MoBL-
USB Kit installation the SuiteUSB package contents can be located by default at
C:\Cypress\Cypress Suite USB 3.4.7. The Cypress generic USB drivers are located in the Driver\bin
folder. The cypress generic USB drivers (ver -3.4.7) are located in this directory for different Win-
dows OS platforms. These are unsigned drivers. For testing the applications provided with SuiteUSB
the Signed driver package provided under <Installed_directory>\<Version>\Drivers\cyusbfx2lp18
can be used. The relevant VID/PID necessary to verify the functionality of each of these SuiteUSB
applications was mentioned in Table 7-1 on page 50.