Data Sheet

Document Number: 002-28053 Rev. ** Page 36 of 47
CYBT-343052-02
Environmental Specifications
Environmental Compliance
This CYBT-343052-02 BLE module is produced in compliance with the Restriction of Hazardous Substances (RoHS) and
Halogen-Free (HF) directives. The Cypress module and components used to produce this module are RoHS and HF compliant.
RF Certification
The CYBT-343052-02 module will be certified under the following RF certification standards at production release.
■ FCC: WAP3052
■ CE
■ IC: 7922A-3052
■ MIC: TBD
Safety Certification
The CYBT-343052-02 module complies with the following safety regulations:
■ Underwriters Laboratories, Inc. (UL): Filing E331901
■ CSA
■ TUV
Environmental Conditions
Table 23 describes the operating and storage conditions for the Cypress BLE module.
ESD and EMI Protection
Exposed components require special attention to ESD and electromagnetic interference (EMI).
A grounded conductive layer inside the device enclosure is suggested for EMI and ESD performance. Any openings in the enclosure
near the module should be surrounded by a grounded conductive layer to provide ESD protection and a low-impedance path to ground.
Device Handling: Proper ESD protocol must be followed in manufacturing to ensure component reliability.
Table 23. Environmental Conditions for CYBT-343052-02
Description Minimum Specification Maximum Specification
Operating temperature –30 °C 85 °C
Operating humidity (relative, non-condensation) 5% 85%
Thermal ramp rate
– 3 °C/minute
Storage temperature
–40 °C 85 °C
Storage temperature and humidity
– 85 °C at 85%
ESD: Module integrated into end system
Components
[20]
–
15 kV Air
2.0 kV Contact
Note
20. This does not apply to the RF pins (ANT).