QU-DP14 1 to 4 DisplayPort Distribution Amplifier OPERATION MANUAL
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Table of Contents 1. 2. 3. 4. 5. 6. 7. Introduction................................................................................... 1 Applications.................................................................................. 1 Package Contents....................................................................... 1 System Requirements................................................................... 1 Features.........................................................................................
1. Introduction The DisplayPort (DP) 1 by 4 splitter allows single DP source to be display on four DP input monitors simultaneously. It supports video resolution up to 2560 x 1600 and audio up to PCM 7.1 switch provides a fast switch between source and display and save EDID’s reading sink time to allow image display properly. The DP 1 by 4 splitter is an ideal device for your DP source to multi display. 2. Applications Multi DisplayPort monitor display Information sharing Advertising program 3.
. Specifications Frequency Bandwidth 10.8Gbps (4lanes at 2.7Gbps) Audio Sampling Rate 192kHz Input port 1 x Displayport Output ports 4 x DisplayPort Power Supply 5V / 3A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human body model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 270(W) x 124.
. Hardware Description The following sections describe the hardware components of the unit. 7.1 Front Panel ① ① Power LED: The LED will illuminate in green when power on and in red when in reset mode. 7.2 Rear panel ① ② ① w ③ ④ ⑤ EDID switch INT/EXT:This switch allows user to select the built-in EDID (INT) or the display's EDID (EXT). Note: When the EDID switch is on EXT, the unit will detect OUTput 1's display EDID and record in the unit.
. STD Mode EDID Support Format VGA 720p 2560x1440 PCM 2CH 48K PCM 2CH 44.
. Connection and Installation 5
A Acronyms Acronym Complete Term EDID Extended Display identification Data DP DisplayPort 6
7
www.cypeurope.
