User manual
Find product information and data sheets on www.keene.co.uk
7
HDMI Audio Amplifier
This is effectively an HDMI switcher that allow you to
embed or de-embed audio from multiple sources. It
delivers a powerful 30W per channel and has IP
connectivity for easy ipad/tablet control. Well worth a
look for any AV multi-room installation.
Features:
• 30W per channel digital stereo Amplifier
• Inputs: HDMI x 2, 1 x L/R Stereo audio, 1 x Optical,
1 x Digital Co-Ax, 1 x 3.5mm Stereo
• Outputs: 1 x HDMI, 1 x Optical, 1 x Digital Co-Ax,
1 x L/R Stereo (Line Level output), Speaker Terminals
• Control via remote control, RS-232 or IP (Web GUI
or Telnet)
• Dedicated Microphone input for commercial
application
• Supports Digital to Analogue (DAC) and Analogue
to Digital (ADC) conversion
• Simultaneous audio outputs
• Compact design for remote application
Specifications:
Inputs 2x HDMI [2x HDMI Uncompressed AV and Data]
1x XLR [1x Microphone]
1x Toslink [1x Optical - 2 Channel LPCM]
1x RCA [1x Coaxial - 2 Channel LPCM]
2x RCA [1x Analogue - Stereo (L/R)]
1x 3.5mm Stereo mini-jack [1x Analogue - Stereo(L/R)]
1x RJ45 [1x IP Control]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x 9pin Dsub [1x RS-232 Data]
Outputs 1x HDMI [1x HDMI Uncompressed AV and
Data]
1x Toslink [1x Optical - 2 Channel LPCM]
1x RCA [1x Coaxial - 2 Channel LPCM]
2x RCA [1x Analogue - Stereo (L/R)]
4x Speaker Binding Posts [1x Speaker Level Stereo
Output]
PSU: 24V/4.16A
Dimensions 255mm [W] x 170mm [D] x 48mm [H]
Code AUA300 £
395.03
HDMI Audio Amplifier with HDBaseT
All the features of the AUA300 above with the added
benefit of integrated HDBaseT input and output. This
means it can be used for creating additional HDBaseT
zones or used to repeat the signal to further HDBaseT
2-Channel Digital AV Receivers.
Code AUA300HBT £
574.61
HDMI Audio Extractor
The HDMI Audio Extractor is a device that allows you to
extract audio signals from your HDMI source. When
connecting with a TV or display you dont always get great
audio, or in the case of a display, no audio at all, so with
this Audio Extractor you can take your original HDMI audio
signal and convert it to Digital Toslink or analogue L/R
audio. What this means is that you can output your audio
signal to external speakers or extend your audio signal, the
HDMI Audio Extractor is the perfect choice.
Features:
Compliant with HDMI 1.3, HDCP 1.2 and DVI 1.0
Supports HDMI Sample Rates up to 192 kHz
Supports Optical Sample Rate up to 48 kHz
Supports TMDS clock frequency rate 225MHz
Supports high-bit-rate (HBR) audio
HDMI cable distance testing showed that with 1080p 8bit
resolution, the input & output can run up to 15 meters
Low power consumption
Supports built-in audio EDID switch of LPCM2,5.1/7.1
or Bit stream
Specifications:
Input Port 1 x HDMI
HDMI Sample Frequency Up to 192 kHz
Optical Sample Frequency Up to 48 kHz
Output Ports: 1 x HDMI, 1 x Optical, 1 x analogue L/R
HDMI Audio Format: PCM2/5.1/7.1, Dolby 5.1, DTS 5.1,
DD+, D-True HD, DTS-HD
Optical Audio Format: PCM2, Dolby 5.1, DTS 5.1
L/R Audio Format: LPCM2
Code HDMIAE £
59.99
Audio Only Source to HDMI
Bridge
The AU-11HB Audio Source to HDMI Bridge is designed
integrate audio only sources into HDMI video distribution
systems. It will accept digital (optical) or analogue (L/R
Stereo) audio signals and output them over HDMI. This
clever device also adds a 'blue-screen' video feed into the
HDMI signal path so that any HDMI AV receiver or display
will accept the audio signal for sound reproduction. It
allows audio from any source to be easily integrated into a
HDMI system, very useful when distributing via an HDMI or
HDBaseT matrix, great for systems such as SONOS etc.
Code AU11HB £
164.64
Bi-Directional Digital Audio over Single CAT Extender set
The PU-305BD-KIT is an extender set designed to send
digital audio signals up to 300m over CAT5e/6 cable
infrastructure. This device is Bi-Directional and
supports Digital Optical signals allowing transmission
up to 300m at 96KHz sample rate, or 100m at 192KHz
sample rate.This extender set also supports RS-232
signals over the same CAT5e/6 cable. The PU-305BD-
KIT can be powered at either end using the supplied
PSU adaptor for added flexibility. Digital audio signals
are supported up to a sample rate of 192Khz, and
support for LPCM Stereo and Multichannel digital
audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is
also provided.
The PU-305BD-KIT is perfect for multi-room AV
systems where the optical audio from a HDTV or
amplifier can be routed back to a rack matrix for
further distribution throughout a wider multi-room
AV system.
Features:
Supports Optical SDPIF Input & Output, plus RS-232
Supports up to 24bit 192kHz audio signals
Supports 192kHz audio up to 100m and 96kHz or
lower audio up to 300m
Supports LPCM, DTS, Dolby Digital and Dolby Digital
Plus signals
Supports PoE (Power over Ethernet) via a single PSU
which can be connected at either end of the extender set
Specifications:
Inputs 1x Toslink [1x TX - Optical 2 Channel LPCM
/ Dolby Digital / Dolby Digital Plus / DTS]
1x 9pin Dsub [1x TX - RS-232 Data]
1x Toslink [1x RX - Optical 2 Channel LPCM
/ Dolby Digital / Dolby Digital Plus / DTS]
Outputs 1x Toslink [1x TX - Optical 2 Channel LPCM
/ Dolby Digital / Dolby Digital Plus / DTS]
1x Toslink [1x RX - Optical 2 Channel LPCM
/ Dolby Digital / Dolby Digital Plus / DTS]
1x 9pin Dsub [1x RX - RS-232 Data]
Dimensions 80mm [W] x 70mm [D] x 25mm [H]
Net Weight 160g
Gross Weight 580g
Code PU305BD £
201.11
Audio
117657_Connections_October_2014.indd 7 16/10/2014 11:21