User manual

Email your order to us at [e-mail]
4
2-Way Speaker Selector Switch
The B-Tech BT12 Allows a second pair of loudspeakers
to be connected to your amplifier with switch select
for either pair or both. (screw terminal connections
suitable for cable up to 2.5mm diameter.
Features:
• Designed to allow the use of two pairs of speakers
with one amplifier
• Speaker selector switch to play either pair of
speakers or both at the same time
• Suitable for loudspeakers from 4ohms to 16ohms
• Screw terminals for strong connection and
minimal loss
• Strong, stylish metal casing
• Accepts loudspeaker cable up to 2.5mm diameter
• 150 watts RMS per channel rating
Wireless Speakers
• Enjoy your complete music collection anywhere in
and around your home (bath room, kitchen, shed,
etc.) wirelessly
• Garden party, BBQ or a romantic evening with just
the two of you on the balcony? Create the perfect
atmosphere with matching music
• Optimal music perception through high quality, omni
directional two-way audio technology. The sound is
spread 360°
• The speakers are splash-proof and fine for use in
the bathroom
• Because of the wireless technology you can place the
speakers wherever you want. Because of the optional
battery power you don’t even need a socket
• Use your iPod, radio or anything with a headphone
socket as the source
• Easy to install and to use; automatic frequency tuning
and maintenance because of Auto Tuning and PLL
function
Code SA352U £ 69.26
Code BT12 £ 13.99
Wireless Surround Speaker Connection Kit
Connect your present home cinema rear speakers
wirelessly; no more loose cables in your living room.
Uncompressed digital transfer ensures sound that goes
beyond CD quality, without interference or delay.
The built-in amplifier in the receiver provides more than
enough power for your rear surround speakers. Automatic
ON/OFF function of both transmitter and receiver for
trouble-free use. The volume is adjusted with your own
remote, because the transmitter is directly connected to
the speaker output. Local volume on transmitter and
receiver for the correct balance between front - and
rear speakers.
8-Way Speaker Selector Switch
This switcher unit allows the distribution of a stereo
amplifier. Simply connect the speaker output of an
amplifier to the box, this output can then be distributed
to up to eight different stereo speaker sets in eight
different locations, each speaker set can be individually
activated via the push buttons on the front of the box.
Ideally suited for buildings where an independent sound
control is required for different rooms or zones. Enables
eight pairs of speakers to be connected to a single stereo
amplifier.
Specifications:
• Heavy duty push-buttons
• Built-in overload protection
• Spring clip terminals
• Designed for 4-16 ohms speakers
• Wiring Gauge 14 to 22 gauge
• Input 1 x stereo
• Output 8 x stereo
• Power per channel 100W max
• Dimensions 432 x 125 x 55mm
• Weight 2.08kg
Code 8WLS £ 29.00
2x4 Speaker Matrix Switch with Volume Control
This matrix switcher for stereo amplifiers has 2 inputs
and 4 outputs. Any of the inputs may be routed to any
of the outputs, or the same input may be routed to all
outputs or any combination. Simply connect the
output of the amplifiers to the inputs, these inputs can
then be routed to four different stereo speaker sets in
four different locations, each speaker set can be
individually activated via the push buttons on the front
of the box and individual volume controls.
Enables four pairs of speakers to be connected to two
separate amplifiers.
Features:
• Heavy-duty push-buttons
• Built-in overload protection
• Designed for 4-16 ohm speakers
• Black aluminium housing
• Individual volume controls with black
aluminium finish
• Accepts up to 14 gauge speaker cable
• Individual A/B switch per zone
• Wiring Gauge14 to 22 gauge
Specifications:
• Inputs: 2 x stereo
• Outputs: 4 x stereo @ 4 to 16 ohms
• Power per channel: 100W max
• Dimensions: 432 x 133 x 64mm
• Weight: 3.67kg
Code 24LMS £ 99.99
Code SA220 £ 89.96
Wireless Audio Sender
A Sender/Receiver pair designed to transmit audio
wirelessly around your house. Take the line (or
headphone) output from your PC, TV or music system
and sonnect it the Sender, then connect the line
output from the receiver back into the remote amplifer
in the room you want to listen in. The sender and
receiver will automatically pair so there's nothing to
configure. Additional receivers can be added for a one-
to-many solution.
Code AA625 (Sender & Receiver Pair) £48.56
Code AA625R (Additional Receiver) £29.66
Speaker Outlet Wall Plates
Twin 4mm Binding Posts
Wall outlet plate with 2 pairs of
colour coded gold plated binding
posts. Fits a standard one gang
patress. Solder tag connection
on rear.
Code HCP20 £11.99
Single 4mm Binding Posts
Wall outlet plate with a single pair
of colour coded gold plated
binding posts. Fits a standard one
gang patress. Solder tag
connection on rear.
Code HCP5 £9.99
Single Spring Clip
Wall outlet plate with a single pair
of loudspeaker spring clip
terminals. Fits a standard one
gang patress. Solder tag
connection on rear.
Code HCP16 £3.99
Twin Spring Clip
Wall outlet plate with two pairs of
loudspeaker spring clip terminals.
Fits a standard one gang patress.
Solder tag connection on rear.
Code HCP17 £5.99
Twin 4mm Socket
Wall outlet plate with two pairs
of "banana" type 4mm
loudspeaker sockets. Fits a
standard one gang patress.
Solder tag connection on rear.
Code HCP18 £4.99
Audio
117657_Connections_October_2014.indd 4 16/10/2014 11:21