User manual

Email your order to us at sales@keene.co.uk
34
D-SLR
LCD Viewfinder for DSLR
HD Video
The DSLR LCD Viewfinder is a great accessory for
anyone using a DSLR to shoot video. It solves the 3
major problems:
1. The necessity to view images continuously on the
LCD screen which, in turn, effects stability and thus
focus where the camera has to be handheld away
from the body.
2. The inability to actually ‘see’ any image on that same
screen when working in any bright lighting
conditions.
3. Trying to ascertain the depth-of-field, even if you can
discern that image.
The DSLR-LCD Viewfinder solves these problems by
providing a finder that gives you a nice, large 3-inch LCD
image to work with, and then adds a 3x magnification for
extra clarity. What’s more, it features quality optics
consisting of three elements arranged in 3 groups.
Clipping onto the rear of your DSLR finder it provides the
perfect environment for comfortable viewing
incorporating, as it does, a soft motion-picture type
moulded eyecup to block out extraneous light - thus
letting you view a perfect image. It also offers an
excellent range of continuous dioptre variations
between + 4 and -4 to accommodate glass wearers.
The combination of these features allows you to bring
the camera in close to your body for increased stability
and secure viewing and filming.
The SEAGULL DSLR-LCD FINDER is an essential tool for
any serious film maker. Without it, that grouping of a
small LCD screen, manual focus, razor thin shallow
depth-of-field, camera shake, sunlight and glare makes
shooting a video an hit-and miss affair...........with it,
the control is all yours!
Specifications:
Magnification - 3x
Optic Glass - 3E3G
Dimensions – 84.5 x 70 x 77mm
Diopter - +/-4
Will fit LCD Size up to 3 inch
Comes complete with hand strap
Code LCDVF £
74.99
LED Light Ring and Flash unit
New from Seagull, a compact and nicely made LED
light ring with flash function. The power pack and
control unit fits onto the hot-shoe on top of your DSLR
whilst the LED light ring is mounted around the lens via
an adaptor ring screwed direct into the camera's filter
thread.
The control unit has a three position slider switch on
the back for off, light (only) on, and light plus flash on.
The brightness is controllable via a rotating wheel and
so you can tailor your light output to your situation.
The flash function is four times brighter than the
output of the constant light to give you plenty of
oomph for the shot. There is also a test button so you
can experiment before shooting begins.
It comes complete with six adaptor rings to fit it to 52,
55, 58, 62, 67 and 72mm camera threads, and it can
be adapted easily to other sizes by using additional
stepping rings (please just give us a call as we can
supply most sizes from stock at reasonable prices).
Specifications:
LED light: Power output 5w
Colour temperature: 5800k
Brightness: 480 lumens
Flash Index: 8.5ft. (ISO100, 1/60s)
Powered by 4pcs. AA batteries (not included)
Code MRC80 £
79.99
LED Light Panels
LED126T
The light head carries 126 super-bright LED bulbs to
give plenty of illumination. These are controled by the
on-board on / off slider switch and a rotary dimmer
gives you control over the amount of light to be used.
Rather than use the traditional choice of AA or AAA
batteries, the LED126T uses a Sony type lithium-ion
camcorder battery with a hefty 4600mAh capacity
(included) to give plenty of shooting time.
Included in the package is a mains charger for the
battery pack with a choice of three plug adaptors (UK,
Euro, US) so that it can be used in many countries
throughout the world.
Two filters are also included with the light, a frossed
diffusser, and a yellow 'warm' filter. These simply slot
into place on the front.
The LED126T can be either stand or camera mounted
and comes complete with a standard sized cold-shoe
adaptor with locking thumb wheel (this also has a 1/4"
tripod thread in it's base), and a mini-shoe adaptor to
enable the light to be used on the Sony / Canon
cameras with the smaller sized shoe fitting..
Code LED126T £
99.99
LED256T
Also available, a 256 LED version.
Light including battery
Weight: 486gms
Dimensions: 29 x 9 x Depth 3 ins.
Code LED256T £
129.99
3G SDI to HDMI Convertor
The Coosis HDCSDHP is a compact device designed for
broadcast and AV professionals for monitoring,
distributing, switching, mulitplexing and processing SDI
signals on an inexpensive HDMI display. It supports
resolutions up to 1080P with bit rates of up to 2.970
Gbits/s. It supports embedded SDI and HDMI audio up
to eight channels at 48KHz.
Input: 1 x BNC (SDI/HD-SDI/3G-SDI)
Output: HDMI type A 19pin female
In/Out resolutions: 480i, 567i, 720P@50/59.94/60,
1080i@50/59.94/60, 1080P@30/50/59.95/60
SDI transmission rate: 2.79Gbits & 2.970/1.001 Gbits/s
Power: 5v DC 1000mA, UK adaptor supplied
Code HDCSDHP £
59.99
HDMI to 3G SDI Convertor
The Coosis HDCHSDP converts HDMI to SDI format
whilst ensuing high bit rates of 2.970 Gbit/s. THis is
useful for connecting consumer devices to preofessional
SDI display for long disance transmission and is an ideal
tool for broadcast, post production and professional AV
applications. The SDI output automatically matches the
HDMI input up to 1080P@60Hz including up to eight
channels of HDMi audio.
Inputs: HDMI type A 19pin female
Outputs: 1 x BNC (SDI/HD-SDI/3G-SDI)
In/Out resolutions: 480i, 567i, 720P@50/59.94/60,
1080i@50/59.94/60, 1080P@30/50/59.95/60
SDI transmission rate: 2.79Gbits & 2.970/1.001 Gbits/s
Code HDCHSDP £
59.99
Rodegrip iPhone Mount (5,5s)
The RØDEGrip+ is a multi-purpose mounting solution
with high-quality lens kit for the Apple iPhone 5 and
iPhone 5S. Featuring a camera-shoe mount with a 3/8"
thread in the base that can be mounted in three
different positions, the RØDEGrip can be used in a
number of orientations and setups including handheld
pistol grip filming, handheld audio recording with the
iXY microphone, Boom stand recording with the iXY,
Camera-mounted audio recording with the iXY, Desktop
mounted display and filming, Camera-mounted iPhone
display for photography apps. The RØDEGrip+ is
supplied with three high-quality photographic lenses (2x
Telephoto, 180 degree fisheye, wide-macro) that screw
into the frame to allow for versatile filmmaking on the
iPhone.
Code RGRIPP5 £
69.99
Please use the search
facility on our website
for "Rode iphone" to see
grips and accessories
for other model iPhones
117657_Connections_October_2014.indd 34 16/10/2014 11:21