User manual

Find product information and data sheets on www.keene.co.uk
33
Code WGTC £ 15.73
Boundary microphone ATR97
This is a low profile compact omni-directional boundary
microphone from Audio Technica designed for tabletop
use. Ideal for conferences, meetings and placing on the
head table at weddings.
Specifications:
• Size: 58mm Diameter x 15mm high
• Frequency response 50-15000Hz;
Impedance 1000 ohms
• Cable length 1.5m
• 3.5mm mono jack plus 6.25mm adaptor
• Power 1 x LR44 battery (included)
• Best suited to camcorders with mini-jack mic sockets
Audio – Microphones
Tie clip windgag
A furry windjammer
designed for lavalier (tie-clip)
mics to be worn on the
outside of the body.
Supplied with removable
foam inserts that can be
combined with the supplied
foam windgag to ensure a
good fit.
Specifications:
• Output impedance: 250ohm (phantom NTG1)
350ohm battery (NTG2)
• SN ratio: 76 dB (1kHz)
• Maximum SPL: 131dB
(@ 1% THD in 1KOhm)
• Dynamic range: 113 dB
• Power (Supply voltage):
1.5 V AA (NTG2) or Phantom (NTG1/2)
• Current consumption:
2.0 mA
Rode RNGT2 Kits
Money saving kits:
NTG2 plus RBP Boompole, RSM3 suspension
shockmount & Deadcat Windgag
Code RNTG2BK £275.00
NTG2 plus an RSM3 suspension shockmount
& Deadcat Windgag
Code RNTG2CK £195.00
Rode NTG1 (phantom power only)
Code RNTG1 £139.00
Rode NTG2 (phantom or battery)
Code RNTG2 £149.00
Optional “Dead Cat” furry windjammer
is available for this mic
Code DEADCAT £24.99
Rode VideoMic Pro compact
Shotgun Microphone
The RØDE VideoMic Pro raises the bar set by the
original RØDE VideoMic, by combining broadcast
quality audio with an ultra compact and lightweight
ergonomic design.
Incorporating new features specific to high end video,
the VMP also evolves many of the features that have
made the VideoMic so successful. Noise transference
has been significantly reduced using both a revised,
more elegant shock mounting system and a lightweight
premium cable.
• Broadcast recording quality condenser microphone
• Compact design (only 150mm/6" length)
• Ultra lightweight (only 85g/3oz)
• 9V battery powered, with up to 70 hours battery life
(alkaline)
• Integrated shock mounting
• Integrated foam windshield
• 3.5mm stereo mini-jack output (dual mono)
• Two step High Pass Filter (flat, 80Hz)
• Three position
level control
(-10dB, 0,
+20dB)
• Camera shoe
mount with
3/8" thread for
easy boompole
mounting
Code RVMPRO £129.00
Code RVMPROKIT mic plus furry windshield £149.99
Rode Boom Poles
Designed to be used with directional microphones held
just out of shot, a boom pole allows a subject freedom
of movement and means you don’t need to worry
about visible cables or microphones (as long as you
have a good boom operator that is!) These boom poles
from Rode are precision machined from high grade
aluminium and are lightweight yet easy to adjust to the
desired length with a secure twist locking action. The
poles have Velcro straps to externally secure a mic cable,
or the end caps can be removed and an XLR cable
threaded internally through the tube.
They have std 3/8 threads for attaching the mic
or shockmount. Three models are available:
Standard Boom Pole length (retracted) 0.84m
(extended) 3.0m
Code RBP £79.00
Mini Boom Pole length (retracted) 0.82m (extended)
2.0m
Code RMBP £69.00
Padded Case, will fit all models complete with mic
attached!
Code RBPBAG £24.99
Micro Boom Pole lightweight 2.0m (extended)
Code MICROBP £29.99
GREAT
VALUE
Code ATBM £ 25.99
Rode NGT1 & NTG2 Shotgun
The RODE NTG1 and NGT2 are lightweight condenser
shotgun microphones, designed for professional
applications within the film, video, television and
production industries.
The 48V phantom powered NTG1 (phantom operating
power only, NTG2 has additional battery power option)
and NTG2 provides a balanced low impedance output
stage. Wide bandwidth and controlled polar response
coupled with low noise SMT electronics, make the
NTG1 the perfect choice for film, video engineering and
voice-over work. Its light weight making it ideal for
mounting directly to video cameras or on boom poles.
The NTG1 & 2 come
complete with mount and
windshield. The windscreen
effectively suppresses wind
noise when recording
outdoors in moderate
conditions.
Rode Lavalier Microphone
Whether you’re presenting for television or live on-stage, in a 20,000 seat auditorium or in a house of worship,
The RODE Lavalier microphone has your needs covered. Featuring the pure, clear audio and low handling noise that
RØDE is celebrated for, the LAVALIER is built to deliver and to last. The included water resistant pop filter and mini-
furry for high wind protection ensure quality recordings in adverse environments, while the anti-trauma water
resistant case provides rugged and secure protection for the microphone, cable and accessories.
Features:
• Ultra discreet appearance
• Incorporated cable
management system
• Ø4.5 mm (Ø0.177")
miniature microphone
• Corrosion resistant stainless steel
• Low handling noise
• RØDE MiCon connector system provides seamless
integration with a wide range of wireless systems
while maintaining discreet and unobtrusive
appearance*
• Gold plated connections
*micon connectors sold separately,
see www.keene.co.uk for details.
Code LAVALIER £ 139.00
Rode VideoMic Microphone
The RODE VideoMic exhibits low noise and an unusually
wide bandwidth for its size. It is ultra lightweight and
incorporates a shock mount to isolate camera body
noise. Its powered by a standard 9V PP3 type battery
and complete with a low battery LED indicator and a
switchable high pass filter to reduce unwanted low
frequency rumble. It has a standard hot-shoe mount
and can also be attached to a boom arm or tripod. The
connection is via a 3.5mm stereo mini jack.
Studio recording quality
Rugged fibre-reinforced ABS construction.
9 V battery operation (not included).
Custom designed integral wind shield.
Condenser Microphone.
Low noise circuitry.
Low handling noise.
Integral hot shoe mount.
Full 10 year warranty (registration required)
Code RVM £69.00
Code RVMDEAL mic plus Pro windshield £84.00
117657_Connections_October_2014.indd 33 16/10/2014 11:21