User manual

Find product information and data sheets on www.keene.co.uk
31
Camera Suppports
LIBEC TH-650 Tripod & Head
An extremely high quality tripod at a great price, the
fluid head has a counterbalanced mechanism which
compensates for the camcorders weight and holds it
steady at any tilt angle. The head also has a 65mm claw
ball which allows for quick and easy head levelling
regardless of leg position. The legs are made from three
section oval pipe which gives good rigidity and also
have a transport lock to hold them in place when on
the move.
Specifications:
• Height, fully
extended
150cm,
• Hieght, folded
75cm
• Weight 3.2kg
• Camera load
capacity : up to
4kg
• Tripod section :
Single stage
• Supplied with
carrybag
Code TH650 £169.00
Spare quick release plate
Code TH650PL £24.99
LIBEC TH-950 Tripod & Head
Due to smaller and higher performance hand held
camcorders constantly entering the market, the industry
enjoys an increasing demand for tripods and heads for
such camcorders. Ever since it was introduced, the
competitively priced high performance TH-950DV has
been one of the world's most popular tripods in its
class.
The removable camera quick release plate is fitted with
a sliding screw for fine adjustment and is made from
extraordinarily strong magnesium alloy. A disc calliper is
used for the tilt brake to hold the head rock steady and
a 75mm ball head makes levelling smooth and steady.
Specifications:
• Height, fully
extended
155cm,
• Height, folded
75cm
• Camera load
capacity: 4Kg
• Ball base:
75mm
• Weight: 3.75Kg
• Supplied with
padded carry
case
Code TH950 £279.00
Spare quick release plate
Code TH650PL £49.99
TPV1 Video Tripod
High quality Camlink TP Video Professional Tri Leg
tripod including soft carry case. Ideal for both amateur
and semi-pro applications where a good quality, stable
tripod is required.
Specifications:
• 3 Section Tri Legs (Removes whip at the start
of a pan)
• Friction (Fluid
effect) Damping
Head
• With 2 Handles
• With Quick
Release Plate
• Ball Leveling
• Spirit Level
• Rubber Feet
• Tilt Range
–85 / +85
• Pan Range 360
• Max. Operating
Height 137cm
• Folded Length 73cm
Code TPV1 £125.95
TPV1 Video Tripod Kit Deal
A complete kit
containing the
Konig branded
version of the
excellent TVP1
Tripod above
together with a
Konig tripod
Dolly.
Code TPV1KIT £169.00
Libec Tripod Dolly
Designed for use with the TH650 tripod, but also works
well with the TH950.
It is foldable for easy carrying and locks into the open
position by a quick release latch.
It also has a braking device on each wheel to avoid
accidental movement when filming.
Sliding screws lock the tripod feet into position to avoid
unwanted movement between the tripod and dolly.
Code TL2 £95.00
Tracking Dolly with Track
Enables you to create super smooth tracking shots with
your own tripod! The dolly has two sets of locating
holes for the tripod legs, which means the tripod can
be used in both high and low positions. It has eight
radial ball bearing wheels which set the track width to
the correct positions as the dolly moves down the track.
The Tracking Dolly is ideal for use on location or in the
studio, all you need is a reasonably flat surface. The
dollies width has been set to allow it to go through
doorways, it has its own levelling system which prevents
any rocking should the track be on uneven ground. It
runs on inexpensive 40mm dia. PVC pipe which can be
supplied or is available from DIY stores. The dolly will
accept all tripods that have feet smaller than 45mm in
diameter or with a base spreader, 3 straps are supplied
for securing your tripod to the dolly and also supplied
are 2 track
connectors for
joining your track.
• Size:- L770mm.
xW620mm.
xH70mm.
• Weight:- 3kg.
• Transit size:-
770mm.
x180mm.x180mm.
Kit price includes:- Tracking Dolly, 3 straps, 6 Track
Connectors & 12 metres of Track.
(8 x1.5m = 6 metre run)
Code D5T £329.99
Mini Motion Cam
The Hague Mini Motion-Cam is a handheld stabilizing
system which is ideal for small lightweight camcorders
or cameras between 0.3kg. and 0.8kg. in weight.
• Supports up to 1.25kg. with additional weights.
• Ideal camera weight 0.3kg. to 0.8kg.
• Quick & simple to set up
• Smooth camera movement
• Eliminates camera shake
The camcorder fits directly onto the stabilizer with
adjustment for moving the camera forward and back
for balancing.
Code MMC £75.00
Headrest Mount
The headrest mount enables the camcorder to be
mounted onto a car's headrest. It is fully adjustable for
the different widths of headrest. The camcorder
attaches to a ball mount, so the camera can be set to
the required position. You get a great view from the
drivers prospective or it can be used to video inside the
vehicle. (Only suitable for headrests with twin posts)
Ideal forMini DV cams & all types of handheld
Camcorders up to 2kg.
Code CHM £58.29
117657_Connections_October_2014.indd 31 16/10/2014 11:21