User manual

Find product information and data sheets on www.keene.co.uk
27
IP Control
IR Commander Matrix
The most advanced and the most capable IR
distribution system we’ve ever produced!
• Full Matrix Signal Routing - Each IR input can be
routed to any combination of IR outputs. This means
for example an equipment cabinet could house say
three identical Sky receivers, and each one can be
controlled independently from different rooms
• Four IR output channels - each IR output
channel can drive IR emitter wands or slave IR
distribution amplifiers
• Six local IR input channels - Four IR receivers, one on-
board IR receiver and one wand input for taking the
output directly from another IR distribution system or
video sender
• IP addressable - Will accept IR over IP inputs from
Keene IR Anywhere modules or from PC’s or
handheld devices, up to 253 different IP addresses
• Internal IR command store - Can store up to 64 IR
codes in local memory, these can then be triggered
by IP command from local network or internet
• Network inputs can be routed based on IP address -
Maximum flexibility for LAN devices
• Built in wideband IR receiver - May be disabled
if required
• Local inputs are “one way IRDA” compatible - Will
route signals to control all popular set top boxes
• Will act as Dynamic DNS update client - Built in
support for non-static WAN IP addresses
• LEDs indicate which input is active - When IR
activity is detected on one input all other inputs are
momentarily blanked to ensure the signal remains
pure and is cleanly transmitted. (the LEDs may be
disabled if required)
• Expansion module sockets for inputs and outputs -
Allows an additional 4 input or output module to be
connected via CAT5 cable at a distance of up
to 50m
Code IRCM £ 169.99
Code KIRARS232 £ 84.99
KIRA RS232
For extended integration options the KIRA RS232
provides IP control for both Infra Red and RS232
signals. This model has no option for an external IR
receiver although its still has an on-board IR receiver
should you need it. In addition to the ability to send
stored IR codes when triggered by IP commands it will
also send stored IR codes when triggered by Keene
defined ASCII commands via RS232.
The KIRARS232 can function as:
• IR to TCP/IP bridge
• RS232 to TCP/IP bridge
• TCP/IP to RS232 (for the CTX35 X10 bridge)
• RS232 to IR (stored codes)
• RS232 disabled (function as KIRA128)
• Supports baud 2400, 9600, 19200, 57600, 115200
Browser Control
The image above shows an iPhone browsing one of
the KIRA128's internal web pages of stored IR
commands
Note, this is a web page and not an "app" and so can
be accessed by any smart phone, PDA or other device
with web browser capability.
IP Controllable Mains Switch
The IPMSW1 is an IP controllable mains power switch. It
has two independent mains outlets that can be
controlled in a number of ways.
Features:
• Simple browser button based on / off control.
• Full browser based set-up and timer configuration
• Adjustable power fail re-start options allow each
switch to delay up to 255 seconds before switching
on. Ideal for remote re-start of systems that require
2 stage start ups
• 3 timer events per switch with daily weekly or
monthly repeats
• During each timer event the switch can be set to
either on or off.
• Own IP address, so can be controlled via internet
using port forwarding.
• Support for DDNS
• Manual override button for each switch
• Optionally use internet time servers to set
internal clock
• Internal “Real Time Clock” IC with 5 year
battery backup
Code IPMSW1 £ 119.99
KIRACC Contact Closure
The new Keene KIRACC Contact Closure module
provides a number of ways to control devices via local
network and the internet. Commands can be issued
simply by accessing the built in web pages via any
device with a browser, and the open API structure
means it can integrate seamlessly with a number of
other IP control systems and apps for tables and smart
phones.
Infra Red
• Infra Red over IP - use either as a real time IR
transmitter in conjunction with another KIRA
module, or use IP control to blast any of the 150
codes stored within the on-board memory.
• Two IR Emitter outputs, individually routable.
• 20 macro commands, each up to 30 steps
• Built in dedicated high accuracy IR learning receiver.
• IR codes stored within the on-board memory.
Contact Closure
• Two isolated relay contacts, each rated at 48v 6A.
• The relays can be set to open, close or pulse with
configurable timings.
• Both relays feature pluggable Phoenix connectors for
easy installation.
RS232
• Contains a TCP/IP to RS232 sever that can be used as
an RS232 / TCP/IP bridge.
• RS232 strings can be stored in on-board memory and
triggered by IP from an app or as part of a macro.
Power
• Built in Power over Ethernet (PoE) capability.
TCP/IP
• Can act as a UDP target for IR Anywhere modules.
• Built-in support for dynamic DNS client for non-
static IP addresses.
Code KIRACC £ 129.99
Code CTX35 £ 199.99
CTX35 RS232 to X10 Bridge
The Marmitek CTX35 communication transceiver can
receive and transmit standard X10 control signals via
the RS232 port. Transmit commands and received data
are in ASCII format and it is directly compatible with
the KIRARS232 giving you the ability to TCP/IP control
your X10 products from anywhere in the world.
117657_Connections_October_2014.indd 27 16/10/2014 11:21