User manual
Find product information and data sheets on www.keene.co.uk
23
IR Distribution Systems
Also available without the mains to USB power supply.
Choose this option if you have have a nearby spare
USB port that can provide power.
IRBKIT Mini with Fascia
Mount Receiver
IRBKIT Mini supplied with a Fascia mount receiver and
a single emitter. This is designed to allow IR control of
devices out of sight behind the display or cabinet. An
additional IR emitter may be added later if required.
Supplied complete with a mains to USB power supply.
Code IRBKITMF £65.17
Code IRBKITMD £63.71
Code IRBKITMDC £54.41
IRBKIT MINI
The Keene IRBKIT MINI is a very compact IR Distribution
Amplifier. It allows you to use your remote control on
equipment located in positions where your remote
wouldn’t normally work. For example, equipment placed
inside cabinets with closing doors or located on shelves
behind you or around a corner. Because of the compact
size and light weight the IRBKIT mini can also be
attached to the rear of a wall mounted display, ideal for
use with items such as Apple TV®. It also features an
electronically isolated “Direct” input, allowing direct
connection to the IR Blaster output from any other
manufacturers products, very useful with CAT5 Extenders
where the single Blaster output cannot control all of the
source equipment.
The unit is very flexible, allowing for a number of
configurations that will solve most IR control
problems.
• USB Power Connection
• Compact Size (60x35x20mm)
• Dual IR Outputs
• Standard IR Receiver Input
• Direct Universal IR Input
IRBKIT Mini with Direct
Cable Input
IRBKIT Mini supplied with 2 x IRDW Dual Blinking
Wands (four emitters) and a direct input cable (no
receiver). This is designed to re-distribute the IR Blaster
output from another device, eg HDMI extender.
Supplied complete with a mains to USB power supply.
Also available without the mains to USB power supply.
Choose this option if you have have a nearby spare
USB port that can provide power.
Code IRBKITMFC £58.19
IRBKITMF
IRPRO4 Basic Kit
IRPKIT4 is the basic kit containing the IRPKIT4
Distribution amplifier, USB Power Cable and a UK
mains adaptor.
IRPRO4 with Standard IR
Receiver
IRPKIT4S2 Is the Basic kit plus a Standard IR receiver
and two universal IR emitter wands.
IRPRO4 with Fascia Mount
Receiver
IRPKIT4F2 is the Basic kit plus a Fascia Mount IR
receiver and two universal IR emitter wands.
Code IRPKIT4F2 £
87.50
IRPRO4 with Panel Mount
Receiver
IRPKIT4B2 Is the Basic kit plus a Panel Mount IR
receiver (black) and two universal IR emitter wands.
Code IRPKIT4B2 £
99.17
The IR Pro4 is very flexible, allowing for a number of
configurations that will solve most IR control
problems.
• Four BestSelect IR Receiver inputs
• Direct cabled input that can be used with other
manufacturers IR Blaster outputs
• Four IR Emitter outputs for use with any Keene IR
emitters
• USB power option
IRPRO4 SYSTEM
The IR Pro4 Distribution amplifier has some powerful
features for demanding installations. It has four IR
Receiver inputs, and uniquely all four receivers can be
located in the same room if needed. Normally multiple
IR receivers will cause timing issues and poor
performance but the Pro4 has “BestSelect” technology
which automatically locks on to the strongest IR signal
and shuts down the other inputs within a fraction of a
second, only releasing them again when the code
sequence is complete. It also features a direct cable
input to redistribute other manufacturers IR Blaster
outputs and it can drive up to four dual power IR
emitter outputs. The flexible design allows for a
number of configurations that will solve most IR
control problems.
Code IRPKIT4S2 £
87.01
Code IRPKIT4 £
61.74
117657_Connections_October_2014.indd 23 16/10/2014 11:21